DisplayPort Switch 8K Splitter Bidirectional DP 1.4 Switcher 2 In 1 Out/1 in 2 out Supports 8K@30Hz 4K@120Hz Compatible with PC Host Monitor Laptop etc

Works flawlessly for me. Critically it does not seem to manipulate the signal at all, only redirects it which is great. The monitor appears to the OS & Display Driver exactly how they would if connected directly. DDC works exactly as normal also. I have only used this in the following configuration. | | <-- PC 1 Monitor <- |Splitter| | |<-- PC 2 Some behavioral notes: - When switching inputs, it appears to switch it electrically. Meaning a computer for example will react as if you just pulled the cable. This is perfect for my use case, but if you frequently switch between computers your windows may get rearranged as a display is connected and disconnected. - It does not remember your selected input if it looses power. - It requires a USB power supply. It does comes with a cable with the barrel connector, but no power supply.

2nd one of these I have bough for a computer desk I am building. I have 3 monitors and am using these to switch between a dock with my work laptop and my PC. Only tested one so far. Nice metal case and really good quality build. It does need a USB port for power, and if the power drops it will always start on DP1. I can't say i have been able to test the quality, I don't have a system at the moment able to do that. Absolutely unique to my situation, I am planning on rewiring these to integrate into the desk so all cables are hidden. It's very nice that they open easily with screws and the switch is the standard common surface mount push button to easy to extend that to my switch panel. The only issue will be the LEDs which are tiny surface mount ones, though they do have markings for a standard round LED so may not be so bad to replace/extend.

Good product and does what it says. No increase in latency which for me was a must. Doesn’t remember which port it was using when it has its power restored so you’d only have to remember which Input you want as a primary.

My plan was to connect two computers to one display using this switch. One computer worked fine, but switching to the other gave no picture. The laptop showed the external display as connected in windows, but I got no image on the monitor. Both PC's worked fine if I connected the cable directly to the display (not using the switch).

Very happy with my purchase of this item, using it to split/switch between an extra monitor and my Vive Pro VR headset. Works perfectly for this and feels well-built and of good quality.

Does what I needed works great. Even allows me to run g synch to my monitor for smoother motion

This product works when lowering both input refresh rates below 60Hz, but with flickering/glitching every now and again. If I want to run two 5120x2160 inputs to a monitor output, I am forced to either lower the refresh rate or the resolution on the inputs otherwise glitching and flickering happen. Lowering the monitor's DP protocol from 1.4 to 1.2 solved the issue but without higher resolutions/HDR being available of course. The cables are fine, tested elsewhere. The USB power is on a standalone high quality power input. Will be returning. This is not a high performance item. EDIT: After making the cable between the switch and the monitor shorter, it works without flickering. The cable limit seems to be around 1m before things start to fail at higher refresh rates/resolutions. This should be made clear in the advert.

Works great, no problem displaying 1440p/144hz

I use this as a switch for my Wacom tablet between two computers. Works fine. Not sure why the review asks about a remote. It sits on my desk and I manually select it.

Habe einen WQHD Monitor auf 165 Hz angeschlossen. Der Monitor hatte so lange Aussetzer, bis ich diesen auf 24 Hz runtergeregelt hatte. Nimmt man Kabel zum Switch und vom Switch zum Monitor die zusammen nicht länger als 2 Meter sind, funktioniert es problemlos! 2 Meter zum Switch und dann nochmal 2 Meter zum Monitor wird nix - wofür der Switch aber nix kann ;-)

Tras buscar algún KVM que admitiera 2K 144Hz y G-Sync y desistir al darlo por imposible encontré este producto. Ya había probado algún switch similar pero de otra marca y no soportaba 144Hz ni G-Sync. Decidí darle una oportunidad a este y puedo decir que ha sido una gran decisión. Funciona perfecto. La única pega, como algunos ya han comentado es que cuando cambias de entrada con el botón, el PC detecta el monitor como si se acabase de conectar, posiblemente porque hace el envio directo del vídeo y no trata la señal. De ahí que funcione como se espera. 100% recomendable.

I finally got a chance to start using this (after 30 day return period passed). Constant flickering and the display would simply shut off for 5 seconds while playing Overwatch. EDIT They contacted me to offer a refund. I stated I wanted a refund. They're processing it now. Will update review when I get it. EDIT2 I got the refund. I've updated the score. Thanks.

volevo usare la sola displayport del monitor, con due pc di fascia alta(gaming) senza dover premere sempre i tasti fisici del monitor per commutare tra dp e hdmi. Solido, di qualità, fa egregiamente il suo dovere (0.5' tra un pc e l'altro)