OVERTURE PLA Matte 3D Printer Filament 1.75mm, Matte PLA 1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.02 mm (Matte Black)

Just WOW!. I'll update with photos of my prints later on. I've been searching for matte filaments and there seems to be limited options. Not only have i think i found it, i dear say i found my goldilocks filament. Ordering 3 more rolls next week as I've been printing 24hrs a day since i got it a few days ago. Excited to try other colors. Roll was nicely wound and print quality is astounding, printing is very easily and was dialed very quickly. and i have zero complaints so far. Layer lines are pretty much invisible even at .2 layer heights. .13 is jaw dropping. Been printing an order for a local hobby shop and they at first didn't believe it was 3d printed as it looked multitudes better than previous filament I've used on their order. I've been printing on my mostly stock ender 3 v2. Only modifications are z-brace rods, bltouch, dual z and printed z motor mounts. Printing here the update NY winter is usually challenging as where i print in my home can be as low as 10c ( will be finishing my enclosure soon). Saying that my only struggle has been minor corner warping and bed adhesion. but i doubt that would be an issue in warmer rooms. The issue has been resolved though as i really squish my first layer (leaves very fine elephant foot that cleans quite easily with a sharp hobby knife or 220grit sand paper) since i print 7-20 parts at a time. Can't afford failures. I am printing on the stock textured side of the ender 3 glass bed. For those with an ender 3 i do Hot end at 195-200c, 60c bed temp at 40mm sec (as i prefer quality over speed ) retract 6.5mm 50mmsec, default cura coasting settings and filament equalizer enabled. 75%-100% fan after initial 2 layers. I'd also like to add that my printed upgrades are done in hatchbox abs for strength and temperature resistance. But now any parts that aren't at risk of high temperature exposure I'm using this matte black pla because it looks that amazing and is suitably strong. If I run into any issues I'll update accordingly. Update 7 Days Later So i ordered this filament for an order for a hobby shop. Printing drag racing slot car stands. I printed 96 of these in 4 different filaments. After the first 28 this filament arrived and after the first test prints i was amazed and now only use this filament. I went through the whole 1kg roll in 6 days. Ordered another and already been printing into the 2nd roll. I've updated my nozzle temp to 210c and I'm using a .8 brass nozzle. A worth while mention is these stands i print they're only 3 bottom 2 top, 1 perimeter and 0% infill. And they're almost perfect, very light and just as strong as previous prints with .4 using 3b 4t and 2 perimeter. The watering can is from thingiverse and printed at 60mmsec, 3 bottom and in vase mode. Also worth noting i check filament diameter periodically as i go through the roll and so far it's been between 1.72-1.77mm. Overall still my new favorite go to pla. I definitely prefer a matte finish and this filament definitely delivers.

Overture PLA 3D Printer Filament is a high-quality and reliable option for 3D printing enthusiasts. It offers consistent extrusion, minimal warping, and a smooth finish, making it easy to work with for both beginners and experienced users. The filament comes in a variety of colors and is known for its excellent printability and durability. It’s also affordable, making it a great value for the performance it provides. Whether you're working on detailed projects or quick prints, Overture PLA delivers solid results every time.

I'm using my Bambulabs H2S to print and I've had no issues what so ever. All prints have come out really clean

I have used two rolls of the matte black so far, and I love it. I haven't encountered a single issue regarding layer adhesion, bad winding, etc. It prints easily and beautifully. The matte sheen gives prints a much more ~premium~ appearance, and really helps to disguise layer lines. I actually prefer this filament over the much more expensive Prusa Galaxy Black. I'm on the fence regarding the matte white however. When printing at lower layer heights, I end up with more nozzle build up than I am used to. I also encountered my first proper clogged nozzle while using the matte white, though it has performed fine ever since. Regardless of those issues (which may just be from my lack of tuning, given other reviewers success with the filament), it still looks great once printed. Prints end up with a clean, paper-like texture.

The filament is as advertised. Matte, black and easy to print with! At the end of the day, a good filament to me is easy to print with, and reliable. I don’t want to have to baby sit the first layer every time. For this filament, the first layer does needs to be dialed in to get the right squish. It can’t be too high for the first layer. It seems to be extra stretchy when it is still warm so i had issue with it catching on the nozzle and causes blemishes or failing on the bottom layer. However, once I got the first layer dialed in I didn’t have any adhesion issues throughout the whole spool.

Overture is awesome and one of the few filament brands to offer matte black filament. 100% of what our shop uses is Overture brand and 90% of what we print uses this matte black filament. Great value for the money this stuff. It’s consistent in color (to be fair, black isn’t hard), never jams (we use X1Es with AMS), and looks cool because it’s not all glistening like it just came from water soaked toy box. Print quality is nearly always perfect and when it’s not it’s more likely that we’re printing something stupid or need to reglue the build plate.

Never had an issue - good quality filament! My go-to when purchasing filament. This will be my 5th spool and all have been perfect

This is the best Matte PLA I’ve used, it might be slightly weaker than regular PLA but either way it prints well and looks very good