TOPGREENER PIR Motion Sensor Light Switch, No Neutral Required, Ivory

Been using these for years. Work well in all applications.

I pulled the 25 year old light switches to find wires wrapped around the screws as expected. snipped the ends off and stripped a new 1/2" bare portion. I like that the wires enter from the rear, straight in a hole, and you lock down with screws on the sides. Switch is no fatter than a GFCI outlet and fits in a wall box easily after you accordion the wires behind it. Time to switch off and sensitivity are adjustable but I left to default as it turns off 15 seconds after I close the door. So handy for our His and Her separate closets that we seem to be constantly in and out of. Next test is longevity.

I'm using this for my bathroom as folks sometimes forget to turn off the light when leaving. It works great and is easy to set. The front panel needs to be pried off with a plastic spudger or similar tool in order to change the settings which is a bit awkward and could lead to damage but is easier than some other units. The weird part is the "warm up time" after installation where the switch will be in the "on" state until it's "warmed up" then will turn off. Overall I think this is a great value buy even if there are some eccentricities. 4/5 stars - Works and looks great but the time to "warm up" is unique in my experience to this unit. Additionally there's a 15 second on/off toggle to "train" the unit to the light level in the room which is unnecessary and easily triggered by accident.

This Motion Sensor Light Switch works perfectly for me; it takes 2 seconds to activate, and it is not overly sensitive, so it does not turn on the light unnecessarily.

Easy to install I had trouble with the motion not turning the lights on. Figured it out with all of the lights off the bathroom window was letting in more than the factory default of 30 lumens. Waited till dark walked into the dark hallway and the light turned on. Made in China

Moved out of rental took two of these out first (I installed), I’m not leaving them behind. Moved from Fl to TX and needed these two here so have 4 now. These are awesome. I have them in bathrooms with light AND fan connected and in a kitchen pantry that always got left on. These are best for bathroom, especially if someone is always saying, did your turn the fan off, go turn the fan off. Cause then others (kids) learn just leave the fan off the entire time, steamy walls is the least of the issue, walk in behind one of those boys and boom, I about permanently wired the fan ON. But these do great, never touch anything, walk in and lights and fan on, walk out and 5 or 7 min later they are off. No yelling about the fan left on and fumes are evacuated, steam too. Adjustable and once you set them, forget as they just work. Never had issue with two in Florida for a year and now have those two plus these two bought here and flawless. Some say they draw power just sitting off, if they do I don’t care for the benefit of them and it would have to be penny’s a month, really, just go with it. I’m also a big Z-Wave user, 16 wall switches and about 4 plug switches with dimmer, but yet I still use these.

The good: Works well. Easy installation. The bad: Horrible QC. Multiple DOAs. Here's the whole story. Bought a 2 pack. faceplates not in package. Could have sworn they would be. Not a deal breaker. Grabbed a few from the local box store for less than a buck a piece. Installed. One DOA. These things happen. I figure I'd sort it out. Reached out to Amazon. They advised going to the manufacturer and claimed that this would be the fastest way to get a replacement. Reached out to the manufacturer. They said to go ahead and request a replacement through Amazon as that would be the fastest way to obtain a replacement. Okay, a little irritated to get bounced around but, I still have options. Requested a replacement through Amazon. While waiting for my replacement, I decided I really liked the function of these and decided to purchase another set. Like many, I have a habit of leaving the lights on in a few rooms and I figured that this could be a great way to solve that problem 2nd set, both DOA. However, this set had faceplates. Now, I'm questioning their QC. However, I only really need 3 working and my replacement set is on the way. Figure I'll sort it out after the replacement set arrives. Might have to make one more return but, okay I guess. Replacement set arrives. 1 DOA. Has faceplates. So, in summary, I am now an expert at removing and installing these and reinstalling the original switches. Over the course of 3 shipments, I have 2/6 working motion switches. Steer clear of these. There is no QC whatsoever. While I am happy with what I have working, if/when these fail, I will steer clear of this brand.

These are okay but did not work well for my application. I wanted them to turn on and off an exhaust fan, the ambient light feature was a problem, covered the sensor with tape but they still did not work like I wanted. Removed and got something different for my situation, but they are great for other applications, just not mine.

actually works, instructions suck but it actually works

Me pareció buen producto como no lo pude instalar inmediatamente hasta ahora me di cuenta que uno no funciona o sea que el 50% bien

Product works great and as it should. no real complaints. However one small jiffy, the motion sensor doesn't seem to capture anything below it, so my kid sometimes doesn't trigger it - or the one by our stairs doesn't get triggered until you're leveled with the sensor... I imagine a lot of them on the market are like that though. BIG QUESTION: had a question for the seller or anyone with the know-how, here it goes: Does anyone have any clue how to get the wall switch to trigger the same light from two different areas? Here's my dilemma, I have a turning stair case and the motion switch is installed at the top, and no switch or motion sensor at the bottom. It only triggers at the top going down. However going from bottom up nothing triggers until I reach the top landing area where the motion sensor switch is. Ideally I would like for the light to trigger on both ends since I go up and down the stairs frequently. I've tried using a mirror with mixed success. At fairly close proximity it appears to work if I angle it right. But a little further midway down the stairs and it doesn't trigger anything. Not sure whether it's cause I'm not angling it right or whether the mirror somehow diminishes the "strength" of the sensor... otherwise based on observation the sensor itself is strong enough to reach the distance I'm shooting for. My other option was to solder long wires to a separate PIR motion sensor I purchased (see image gallery). The additional PIR motion sensor is simply just that, a sensor with 4 wires coming out... not a switch. I was hoping to place this one at the bottom of the stair case, using long wires to connect it to the upper stair case Motion sensor light switch. I was thinking of soldering the wires directly to the circuit board of the motion sensor light switch (same connection points where the native sensor is already installed on the switch.) I'm assuming if I solder the same wires to the same points it'll somehow complete a circuit or trigger it the same way the native sensor would. But after taking a closer look at the circuit board, not all the connection points are labeled clearly enough where I would feel comfortable enough to go ahead with it. If anyone has any suggestions it would be appreciated! better yet, if anyone could suggest how I can get this to work that would be awesome. Wow I wrote a lot, hope this finds somebody lol.

Al inicio todo bien... las luces de la escalera encendian con el sensor y permanecian encendidas de acuerdo al tiempo que se ajuste... pero en tan solo un par de meses, las luces quedaron encendidas permanentemente... no hubo forma de apagarlas... ni manualmente... tuve que retirar estos switches y volver al convencional (manual). NO lo recomiendo.

Looks great