Spot Weld Cutter, Sheet Metal Hole Cutter, Punch Remover Panel Separator for Power Drill Welding Auto Body Work Tool, 3/8 Inch Drill Bit Tools, 9 Pieces

Great tool and value for money.Removed rivets and spot welds easily from land rover series 109 rear floor. Recommend!

Works really well however I found it easier to use if you centre punch the weld first then use it and on full speed while applying gentle pressure until it cuts the weld out going to slow without the centre punch is really hard too keep it aligned

Great little kit and worth the money.

Wasn’t sure how long these would last but amazed just how strong they are. Still using the first cutter after roughly 60 spot welds, and some off these weren’t the easiest to get to, not all at 90 degrees. Using a socket extension bar was able to remove 4 welds that saved removing a van side door.Would definitely buy again if ever needed and thoroughly recommend.

Works well. Only issue I had was that I didn't receive a drill bit.

Stayed sharp

I had to change the front end of a 28 year old Mazda MX5 which had rusted for one from a donor front end. There were hundreds of spot welds by the time I had to take off both front ends and this little tool certainly made a pain in the rear much less of a pain to do. Beware, these are quite brittle so be gentle when you use them and you'll be as pleasantly surprised as I was about how much better they are than just a standard drill bit.

Important to use a good center punch! After which the cutter does a great job at slow to medium speed.