Does this part fit my 1996 Camry le upstream?

Go to Denso web site. http://densoautoparts.com/

I have a 2000 toyota 4runner, are both the o2 sensors the same? if so i'll just buy two of theses for my truck

For a 2000 4Runner LIMITED 6-cylinder...non-california, automatic, 4WD....TWO of these will work for both upstream and downstream. CONFIRMED. just installed both today...no need for longer wiring harness.

How do you know if you need to change the upstream or downstream? i have a 2003 toyota sequoia limited 4 wheel drive. thank you.

Save yourself the headache and change both at the same time. Codes will drive you crazy!

See i have a 2000 sr5 4x4 4runner and i need both 02 sensor part # please also how many do I need

I have a Tundra and have replaced all sensors (4) in my vehicle. The Tundra has a devoted dual exhaust & 2 catalytic converters, one for each side (Driver's / Passanger) of the engine. The exhaust then either combines into a single exhaust pipe seen at the back of the vehicle or maintains separation (devoted), in which case there are 2 exhaust pipes at the rear of vehicle. I'm not sure what configuration your 4runner has, or has been modified to, but can tell you this. What O2 sensors there are go on the exhaust before and after the catalytic converter/s and so a quick inspection under the vehicle should tell you whether you need 2 or 4 sensors. The UPSTREAM sensors (before the catalytic converter/s) on my vehicle bolt into the exhaust by threads on the the sensor itself. The DOWNSTREAM sensors have a double holed mount that 2 bolts from the exhaust pass through and are tightened into place with hex nuts. You will need a slotted socket in order to tighten the UPSTREAM sensor on without to much of a problem. It's not worth trying to do it any other way. Use caution to not to slow turn & break the sensor or mounting bolts when taking them off. I would recommend hammer tapping as opposed to a steady torque force to snap the frozen nuts free for turning. Once free, but still extremely tight, penetrating oil will be able to be sucked up into the threads for further loosening, but until the nuts or sensor has snapped free for turning, penetrating oil won't be of much assistance. Good Luck

Brand	Denso
Item dimensions L x W x H	5.75 x 2.19 x 1.88 inches
Material	Stainless Steel, Zirconium
Item Weight	0.25 Pounds
Style	Replacement Part
Measurement Accuracy	Meets or exceeds OE standards
Mounting Type	Thread-In
Output Type	Push-Pull
Sensing Distance	1E+1 Centimeters
Specific Uses For Product	Replacement Part
Upper Temperature Rating	8E+2 Degrees Celsius
UPC	042511141629
Global Trade Identification Number	00042511141629
Manufacturer	Denso
Model	Harness
Item Weight	4 ounces
Product Dimensions	5.75 x 2.19 x 1.88 inches
Item model number	234-4162
Is Discontinued By Manufacturer	No
Exterior	Machined
Manufacturer Part Number	234-4162
OEM Part Number	234-4162

Denso Oxygen (O2) Sensor - 234-4162 (Fits Select Years of Toyota: 4Runner, Pickup, Sequoia, T100, Tacoma, and Tundra Vehicles)

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة