MEIJIA IP67 Waterproof Hard Protective Case,Compact Hard Camera Case,Small Hard Case with Customizable Foam, Fit Use of Drones,Camera,Lens(10.62 x9.68x4.87inches,Black)

I have bought a few of these boxes in different sizes over the years and I've never been disappointed. They are built to last from a tough plastic that feels like it will last for years. The use cases are endless. I've used them for storing back up hard drives as well as my Go-Pro camera. The pick and Pluck protective foam makes it easy to adjust the shape to suit whatever you are looking to store. As far as size and storage are concerned, make sure you check the internal dimensions based on what you want to store rather than just the external dimensions. Add an extra 10mm all round to whatever space you need and you can't go too far wrong with the size you need. If you have anything delicate that you need to store away, or need a small protective travel case then I definitely recommend these every time.

Great quality, robust construction, including hinges and latches. Foam insert good quality. Used as case for horse clippers. Can see it lasting longer than the clippers.

If you are thinking of this as a watch case I can recommend it. I managed to fit 10 watches in. The foam has small square pre-cut sections. You can easily fully cut them out using your fingers. I found 3 squares wide and 4 squares down was the perfect size to fit a watch. The 3X4 part that you pull out is what you can strap your watch to. If I has any criticism it would be that it would be nice if the foam insert was a little sturdier. but for the money I cant complain.

As a Pelican alternative at a fraction of the cost, this case works well. Beware to check both the internal and external dimensions, though! I bought this originally for my Scarlett 2i2, having not read the internal dimensions, and was disappointed when it didn't fit, but I'm making use of it for my SM57 clones instead. The exterior is solid - I wouldn't expect this to fall apart any time soon. I wouldn't trust the rubber seal with heavy water exposure, but it should be good enough for most use cases. The foam is relatively low density, and the top/bottom layers aren't super thick, so this may not offer the most protection if you're dropping it off a building, but it'll certainly be better than nothing. The foam can be pulled out in cuboidal columns (~0.5x0.5x2in/1.5x1.5x5.4cm) to fit to the shape of whatever it is you want to keep in the case, but it's worth noting that these columns are not pre-cut halfway down or anything of the sort, so if you have an item that isn't particularly tall like an SM57, you'll want to lay some of the foam you take out sideways in the bottom to prevent your items from wiggling about, or manually cut the columns you remove in half. I've put pictures of how I did this below. The case also has two holes for padlocks, should you wish to use those (but they're of course not included). After reading some other reviews, people have said that the sizes are not as advertised. This is false - these people simply read the external dimensions and not the internal. Having measured the case, the advertised internal dimensions are correct. I will say, though, the useable dimensions are about an inch less in each direction due to requiring a layer of foam on the outside, but with some basic logic most people could figure that out. Overall, I would recommend this as a (relatively) cheap way to protect and store gear while travelling, with the caveat that you might need to get creative with your foam arrangement. Is it going to be as good as a Pelican case? Of course not, it's half the price... But it's good enough for me, so do with that what you will. And to reiterate: please, for the love of all that is holy, cross-reference the internal dimensions (seen in the product images or if you scroll down the product page) with your gear's dimensions. The dimensions listed in the product title are external. For reference, I will be purchasing one of Meijia's other cases, the 9.17inchx7.56inchx4.33inch model, for my 2i2 (this one should have the correct internal dimensions!). I imagine the quality will be the same, but I'll write a separate review for that when it comes.

Very good

I bought this to house my metal stamping equipment. The case feels sturdy and has some reassuring weight to it. The two clips snap shut the lid and it feels securely closed. The 3 piece foam layout is perfect, the lid and base have a fixed foam lining, the there is a block of foam 8n the middle that splits as required. It holds the items still inside. Overall it's good value for money and offers great protection for whatever you want to keep inside.

Robust plastic carrying case. -- Good design. -- Good material, and good colour (green). -- Waterproof seal. -- Solid lid latches, easy to use. -- Comfortable carrying handle. -- Full foam cushioning, pick-to-fit. -- Just the job for a tough life ! --

The case feels perfectly serviceable and quite robust; however, the finishing of the case is fairly low quality, and the moulding feels as though it doesn’t line up completely. I attached some pictures showing where the pour/injection spout marks on the moulding have been hastily scratched or cut off. As this case was still reasonably expensive considering its size I feel it does lack quality. Another comparison worth mentioning compared to other brands is that the clasps are single click, not the hinged button type, These may be accidentally opened more easily.

Very solid case - perfect for shock-resistant storage of a camera etc

super produit!!!!

Good quality , worth the mony

Dålig kvalitet

These are amazing protective cases, except the padlock hole protectors (or stainless steel hasp protectors / padlock reinforcement inserts) keep pulling off.. I'm trying to figure out how to get more of these because one of mine fell off and I lost it... other than that these cases are amazing.. they just need to be cinched down a little tighter.