Skywalker Single Feed-Through Cable Bushings (White / 100 Pieces)

I recently purchased the White Skywalker Signature Series Single Feed-Through Cable Bushings. Let me share my experience with this product:Quality and Durability: These feed-through bushings are made of ABS plastic and are UV-stabilized. They feel sturdy and can withstand outdoor conditions, including weather, insects, and rodents. Have installed these both on the interior and exterior walls.Functionality: The primary purpose of these bushings is to provide a clean installation for coaxial cables, low voltage cables, and more. They seal wall openings effectively, preventing abrasion damage to the cables. Whether you’re a professional installer or a DIY enthusiast, these bushings are a must-have to make it all look professional!Easy Installation: Each bushing accommodates a single coaxial cable. To install, you’ll need a 1/2-inch pre-drilled hole in the wall. Use a silicone sealant (sold separately) for a weather-proof seal.Quantity: The package includes 100 bushings, which is more than enough for most installations. Having extras is always handy!Affordable: At an affordable price, these bushings offer great value. They’re perfect for both indoor and outdoor cable routing.In summary, the Skywalker Signature Series Single Feed-Through Cable Bushings are reliable, weatherproof, and essential for any cable management setup. Whether you’re organizing cables for home theater systems or network installations, these bushings get the job done.Highly recommended!

Excellent price...the quality is just as good. I hope the seller adds some photos with exact dimensions so people don't have to guess the size. Will buy again!

Priced right, arrived quickly, would have given 5 stars except for one little problem. The product description says it requires a 1/2" predrilled hole. I believe this is either incorrect or I was sent wrong size (which I doubt). With a 1/2" hole they fall right out, on ceiling anyway. I used a 3/8" drill and with a slight hammer tap they went right in and appear to work fine. I was able to fit 3 pairs of speaker wires (3rd was tight but fit). Now I just need to patch that first 1/2" hole.

I know what you are thinking: "Bob, this thing is a simple piece of plastic that you shove in a hole and move on with life".You'd be right, sure. But something else to consider: The spines are rigid, and you are forcing it into sheetrock which crumbles away to make room. When you are done, the sheetrock is the same/slightly larger size than the item you just forced in. The spines aren't like a porcupine or something. They don't auto expand like sheetrock anchors. It's like hammering in a sheetrock screw and expecting the screw to stay in place.So just keep in mind that you'll probably have to adhere the bushing to the wall/hole in some manner even though it has spines.These are "paintable", which means you will want to lightly sand and prime if you want the paint to stay on - so at least sand it before you glue it into the wall.The hole works fine for the 14AWG mediabridge white cable that is sold here on Amazon but it is tight. The thing to consider when using 14AWG is that you won't be pulling it through the bushing after you install it. Think about it: This bushing extends at a 90 degree angle through the wall. The cable is likely coming to the bushing on a plane similar to the wall itself. Good luck making that friction point work in your favor while trying not to rip the bushing out. So my advice is to install the bushing around the cable and pull out the desired length of cable prior to gluing it into the wall.My only suggestion, behind reinventing it to make it self securing in a realistic way while installed in sheetrock: make the back end split/splayed in some manner to allow cables to curve into the back of it instead of a 90.

I had to pass water lines through the bathroom to another room and before it kept the dopr from being closed making the bathroom unusable. I decided to poke a hole above the door to run it above the door jam and use these to smarten up the look of the hole and let the tube run through it and it has worked great.

Work great for CAT6 wire.

En realidad pense que el material era mas blando, son fuertes y rigidos. aun asi cumplen su funcion perfectamente

I see a lot of people complaining about them not holding tight in ceilings, if you get the right size hole they seem to work good for me, don't get me wrong they could be better but they stay where they need to stay.