Desertcart Logo

Q: I live in Az.I need a hard start kit for a 30,000 btu 2.5 ton,which one do you recommend?

The Supco uses a Positive Temperature Coefficient Relay (as stated on their website) not a Potential Relay. Not Good! Only use Hard Start Kits that use a true Potential Relay. The RectorSeal Kickstart (2 wire) and the 5-2-1 Compressor Saver (3 wire) hard start kits use a Potential Relay. I recommend the Kickstart (it uses 2 wires that connect to the Run Capacitor - HERM and COM). But the Compressor Saver is also good (3 wires with one connecting to the common / ground on the Contactor relay). They both work the same way - the Potential Relay detects the pickup voltage (back EMF). This causes the relay to disconnect the start capacitor when the compressor reaches about 75% speed (usually less than a second). Note: Supco does have hard start kits with a Mechanical Potential Relay (Models 3W1, 3W2, & 3W3) but they are not available on Amazon.

Q: If there is an existing start capacitor, can you put this one in parallel with it or the run capacitor?

This takes the place of the start capacitor. It gives an old compressor a "punch" as it starts and it immediately goes out of the start up circuit. They work! It is wired in parallel with the run capacitor, which stays in teh circuit so your compressor will run more efficiently..electrically speaking.

Q: Can a hard start kit help an a/c compressor start when powered by a generator which more than satisfies the unit's FLA but is just shy of the LRA?

Greetings,I use these for my rental apartment AC units they keep these old units running and starting easy! They need to be checked every 2 year or so. If you are just shy of the Locked Rotor Amperage; The amperage the motor draws when the voltage is first applied to the motor and the rotor has not started to turn. This amperage is usually up to 300% of the motors running amperage. Once the rotor starts to turn the motor generates a back EMF (electro motive force) that opposes the high inrush current. This back EMF drives the amperage down until the motor gets up to its rated speed at which time the motor amperage will be at its run amperage. This device helps starting and should make you successful. Make sure that your line voltage is being properly supplied during the high current peak that you have proper AWG for the load and length from your generator to your compressor as it could be a voltage drop issue.Never the less a good part and should help.Best of LuckDarrell

Q: Is this pretty easy to install? Is it just removing two wires from the old capacitor and reattaching to the new hard start capacitor? Thanks.

The hard start cap installs in parallel with the old cap. You connect one wire to the common and one wire to the herm terminals on the old cap. This just gives the compressor an extra kick. I would recommend that you get the 5-2-1 hard start kit instead. I have tried both and the 5-2-1 works better. Just search on Amazon for 5-2-1 hard start kit.

تسليم إلى EGYPT

للحصول على أفضل تجربة احصل على التطبيق

قم بتنزيل التطبيق

نحن مصدر العناصر من

الإمارات
UK
الهند
USA
اليابان
KOREA

خدمات العملاء

معلومات عنا

دعم العملاء

الوصف

⚡ Start Strong, Stay Cool – The Ultimate Hard Start Upgrade!

RELIABLE SUPCO QUALITY - Trusted brand ensuring durability and consistent performance for residential and commercial use.
VERSATILE MOUNTING OPTIONS - Fits perfectly with panel or surface mount setups for easy installation.
LIGHTWEIGHT COMPACT DESIGN - At just 4.8 ounces and small footprint, it’s hassle-free to handle and install.
POWER UP WITH 500 MORE TORQUE - Supercharge your compressor start-up and avoid costly downtime.
SEAMLESS PSC SYSTEM INTEGRATION - Designed specifically for permanent split capacitor single-phase A/C and heat pumps.

The SUPCO SPP6 Hard Start Kit delivers a powerful 500% increase in compressor starting torque, engineered for permanent split capacitor single-phase A/C and heat pump systems. Compact and lightweight, it offers flexible panel or surface mounting, making it an essential upgrade for both residential and commercial HVAC units seeking reliable, efficient startups.

المواصفات

Maximum Voltage	277 Volts
Mounting Type	Panel Mount or Surface Mount
Product Dimensions	6.5"W x 7.25"H
Manufacturer	SUPCO
UPC	687152031528 687152197361
Global Trade Identification Number	00687152197361
Part Number	SPP6
Item Weight	4.8 ounces
Item model number	SPP6
Is Discontinued By Manufacturer	No
Power Source	AC
Voltage	230 Volts
Item Package Quantity	1
Included Components	Electrical Replacement Parts^Electrical Replacement Parts^replacement-household-furnace-control-circuit-boards
Batteries Included?	No
Batteries Required?	No

لديك سؤال؟ انظر ماذا طلب الآخرون

I live in Az.I need a hard start kit for a 30,000 btu 2.5 ton,which one do you recommend?

If there is an existing start capacitor, can you put this one in parallel with it or the run capacitor?

Can a hard start kit help an a/c compressor start when powered by a generator which more than satisfies the unit's FLA but is just shy of the LRA?

Is this pretty easy to install? Is it just removing two wires from the old capacitor and reattaching to the new hard start capacitor? Thanks.

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

عبد الله ب.

سعر رائع لمنتج أصلي. شحن دولي سريع أيضًا!

منذ 3 أسابيع

يوسف أ.

تجربة رائعة بشكل عام. سأوصي بها للأصدقاء والعائلة.

منذ شهر

عرض جميع مراجعات ترست بايلوت

تسوّق عالميًا، ووفّر مع Desertcart

قيمة مقابل المال

أسعار تنافسية على مجموعة واسعة من المنتجات.

تسوّق عالميًا

خدمة ملايين المتسوقين في أكثر من 100 دولة

حماية معززة

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

ضمان العملاء

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

تطبيق Desertcart

تسوّق أثناء التنقل، في أي وقت وأي مكان.

E£ 3090

الرسوم والضرائب مشمولة

EGYPTمتجر

الشحن مجاني

with PRO Membership

إرجاع مجاني

30 يومًالمستخدمي عضوية PRO

15 يومًابدون عضوية

معاملة آمنة

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

نهى س.

اتصال ممتاز طوال عملية الطلب. المنتج مثالي.

منذ أسبوعين

رافي س.

أحببت تنوع المنتجات المتاحة. سأقوم بالتسوق بالتأكيد مرة أخرى.

منذ شهرين

عرض جميع مراجعات ترست بايلوت

SUPCO SPP6 Relay/Capacitor Hard Start Kit with 500% Increase Starting Torque

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة