GUNK CEB1 Engine Shine Protector and Detailer, 15 Oz

So to achieve engine detailing results like in my pictures, you need this product (Gunk Engine Shine) and also the Gunk Foaming degreaser. The first step is to remove the battery entirely and take a plastic grocery bag to cover up the alternator. Then take a leaf blower or compressed air and blow out any loose dirt / debris in the engine compartment. Use Gunk foaming engine degreaser to spray down dirty surfaces and agitate or brush the dirty surfaces with a soft bristled brush. I usually use a plastic bristled dish washing brush for this. Once you've scrubbed the dirty surfaces, use a garden hose on a very low "mist" setting to gently wash away the degreaser. I avoid spraying electric components like sensors, spark plugs, ignition coils, etc. Then once you're satisfied with the cleaning, use your compressed air or leaf blower to dry the engine compartment. Lastly, use this product, Gunk Engine Shine Protector / Detailer and spray all your surfaces. A little goes a long way (I can usually detail four to six engines with one can) so this product is a good value. After I spray everything down, I used a chamois to wipe everything and work in the Engine shine. It is very oily but it lasts and maintains it shine for a long time. It's one of my favorite automotive products, it really can make an old car look new and I whole-heartedly recommend it.

I've used many products over the years as an engine dressing and I have to say this is one of my favorites when applied correctly. I think the directions on the can leave out some necessary steps to avoid dust/gunk build up from over application, and a proper looking clean and Satin look. For engine dressings in the past I have used ; CDI Engine Detailer, Optimum Opti-bond gel applied with an air gun, Ultima Trim and tire shine, Chemical guys Barebones, Carpro Pearl, and I'm sure others I'm forgetting. I first clean the engine bay, once it's cooled down, by spraying an all purpose degreaser ( Optimum Power Clean 3:1) all over and scrubbing any build up areas. Then rinse with the hose on the shower spray pattern, making sure not to directly spray into electrical connectors and components. Then I use a leaf blower to dry and blow all the water out the areas it pools up. With it still semi wet I lightly mist the entire bay with the can a out 2-3ft away. At this point it will look wet and greasy. Let that dwell for about 10 minutes then come back with a microfiber or paper towels and wipe the excess off . Really I wipe down everything that I can. This is key to avoid excess product that will attract and hold dust. It will still be really wet looking at this point, but no pooling of the detailer should remain. After a few heat cycles it will even out and you will have a 'like new' Satin sheen on all plastics/covers and a slight gloss on metal parts. Looks like a cars engine bay with 0 miles on it when done this way. Not a slick, sloppy wet and greasy engine bay like you see on used car lots. Future cleanings area easy as it does seem to create a barrier for the dust/grime to slide right off. I noticed on the ingredients it has D-Limonene, which is a citrus derived cleaner(among other uses) , and gives the detailer its scent, which I find to be the only con of the product. Think citrus mixed with motor oil as the scent to describe this product. However it does go away after a few drives. Will purchase again! See photo for my engine bay a week after application.

I recently cleaned my 1985 Porsche 944 and tried GUNK CEB1 Engine Bay Cleaner, which turned out to be a game changer. The pleasant scent and easy-to-use spray nozzle impressed me right away. My engine bay, previously grimy and dusty, transformed after spraying the cleaner generously, letting it sit for a few minutes, and then gently scrubbing it before rinsing. The results were incredible—the grease and grime disappeared completely! I love that GUNK CEB1 is safe for various surfaces, including the plastic and rubber components in my vintage car, without causing any fading or damage. Now, my engine bay looks immaculate, making me more confident in its performance, and I’m ready to show it off at car shows or during weekend drives. If you want to refresh your engine bay, I highly recommend giving GUNK CEB1 a try; it made my Porsche shine like never before, and I couldn’t be happier!

Works great. Also shines boat hull

My dad loves to clean the engines for the entire family. It makes him feel good, our engines look great and makes us feel like we take care of our cars. It is very easy to use. My dad is in his 90s and is able to do this for us will use number one and number two and I always order at least six cans at a time because great

It works great on my car.

this product is really good the engine compartment looks zing.

Great product

Best product for engine cleaning.. 100% recommended…

too oily and catches dust.

ممتاز ويستخدم بعد التنظيف بالفوم او اي منظف وبعدها يتم وضع هذا الملمع

ok

ممتاز كتلميع لكن لا أدري هل يجمع تراب