Hard Top Remover Lift for Jeep Wranglers: 2007-to-Present JK/JKU/JL/JLU + CJ, 2&4 Door + Lifted Jeeps. Quick & Easy Assembly. One Person System. Hardtop Removal/Installation in Minutes. Patented

Top quality item is one of the best products I’ve ever purchased on Amazon. Packaged with organization and care, this lift was easy to put together and is flawless in design and functionality. It’s packed with spare parts and clear instructions. Although it’s not cheap, the value is evident and is sure to save me many hours of time, and many hours of excess effort removing, storing and installing my hardtop.

Been owning wranglers since I was 18, I'm on my 9th Wrangler now. This is the best "must have'' if you have a hardtop. I usually buy Hardtops, sell the top and make it pay for the lift, wheels bumpers or what ever I needed, specially since I ran my jeeps topless most of the time. This year I bought a 2024 Wrangler with a HT, took the top off the old hard way, just me and my back. At 60. it aint as easy as being 30,40 even 50. So I started looking for helping hand. After much research I settled on this lift system.Came in quick, a single large box. opened it, did a part check, 20 minutes it was assembled if that. all tools provided. I was impressed with the quality of the metals, precise cuts and welds. good quality casters, which two are lockable. After assembly, I had to left the top of the ground cause that's where I had it sitting. A bit of knee pain and lots of grunts, I managed to barely get it over the machine, and it was smooth sailing from then on, rolled it onto the Garage, sat there suspended till today (About 3 weeks) rain is coming tonight. So, I rolled back out, very straight, maneuverable, easy to push, aligned it with the wrangler, pushed it but by bit, lowered it, placed the bolts, they fit perfect, then 100% lowered it and rolled it back to the garage. took me about 2-3 minutes to have top perfect on the jeep.Pro: Easy assembly, 20 minutes if you know stuff. 30-45 if you know nothing. Very solid built, good fitments, good casters, tools provided.Cons: Could be a bit cheaper. but not bad really.I highly recommend, I might modify it to have hold the doors also! Maybe I said. Buy the darn thing.

I just recently learned about the RollnJack lift and after reading reviews/Q&As/FAQs and watching every video I could find, decided it should work well for me and placed my order. I had previously been using the Wayalife method of removing/storing the hardtop, however this seemed like it would be much quickerThe RollnJack arrived in sturdy packaging just as noted in many other reviews, and all the parts were nicely packed inside. Installation took less than an hour, including unboxing, separating parts, etc. Instructions were accurate and easy to follow.Once assembled, I tried it out right away. I have a stock JLU Rubicon and backed it into the garage about halfway, then removed the freedom panels and all the bolts for the hardtop. I set the post with 5 holes showing at the bottom, and moved the lift into position, locked the wheels, turned the crank to move the posts up a bit, made some decisions about the contact points, then kept cranking until the hardtop was lifted. I then unlocked the wheels and started to pull the lift back, however the front of the hardtop tilted down more than I expected, so I cranked the lift up more until everything looked like it was going to clear. I then backed it out again, same as in the RollnJack video, making a slight turn to the left while backing up in order to clear the spare.Once I had it moved back enough, I added the fifth support post, then pulled it back to be flush against the raise in the garage floor. Then came the parking test. The Jeep was able to park in the garage with the hood under the lift holding the stand, in the same position as I usually parked it.Although the tilt of the hardtop when on the lift looks much more extreme from what I expected it to be, it still feels very secure, and I am pretty confident it is not going to budge.My overall impression with the RollnJack lift is that is delivers as promised. It is very well thought out, feels very solid, and made removal of the hardtop much quicker and simpler than the previous method I was using.I will update this review once I use the lift to put the hardtop back on (probably later this week), but it looks like it is going to make that task pretty easy as well.For reference purposes, my garage is 19’6” deep, with the last 36” being raised up 3”. I did end up putting a section of 2x6 down against the raised part of the garage floor in order to move the lift back towards the garage door a little – did this as the entry door to the house is directly in front of where the Jeep is parked and I wanted to provide a little more space to clear the crank handle.The only suggestions I have for RollnJack at this is to add clearer examples/videos/photos of contact points for the posts, and maybe make the crank handle removable or foldable.So far I am very happy with my RollnJack purchase!

I have a 2021 Jeep Wrangler Rubicon Unlimited with a 2.5 inch lift and a 2022 4xe Rubicon Unlimited. The RollnJack hard top lift works GREAT on both vehicles. It is really simple to use and very sturdy. I have a roof rack on my 2021 Wrangler so it is a bit heavier than others. But this lift still works great. I don’t think I need to but I did put a simple “tripod type” support under it for storage, just for my piece of mind. The lift material is heavy duty and sturdy. It was very simple to assemble. It took me about 15 minutes to put it together. But that includes reading the entire manual before starting. The included plastic turn knobs/nuts made it much easier to put together. I am very happy with this product. I highly recommend it to anyone looking for a hard top lift system.

The Rollnjack lift was easy to assemble and begin using. This is the second system I purchased for removing my hardtop by myself. I bought an electric hoist several years ago, and it worked fine, but I had to move from the house where it was installed and the ceiling in my new garage is not high enough to remove the top with ease, so I gave the Rollnjack a try. I got the lift, assembled it, and used it to remove and store my jk 2-door hardtop with ease. The stress of taking the top off and removing it has been solved. The lift holds the top securely, and the heavy duty casters make moving the lift around the garage, with the top on it or without, a breeze. I am very happy with my purchase. I am so happy to not have to stress about removing my top anymore!