Betaseal U-428 Dow Auto Glass Primerless Urethane//Adhesive with Single Application Primer (2)

If you know anything about glass work then you know Betaseal products are good stuff. Good products, good price, and fast shipping. It was refreshing to see that the exp date was not coming up anytime soon on these tubes which tells me this wasn't just a batch that had been sitting around for months on end. ;I'm always hesitant buying from third party sellers on Amazon but won't hesitate to buy from them again.

I had to replace my quarter panel window. I needed a good strong bond to glue my window on and prevent leaks. I honestly have never installed a window in my life, but I didn’t have the money to get it done. After watching videos and reading reviews I decided to give it a try. I cut out most of the old urethane from the vehicle with a blade. I cleaned and primed both mating surfaces with the supplied primer. A V shaped notch was cut into the nozzle of the urethane tip. I applied the product onto the car with a heavy duty caulk gun because, the regular gun I tried to use, wasn’t strong enough. The window was put in place firmly and held in with lots of blue painters tape. I used lots of tape because I didn’t want the window to move out of position. I took the tape off a day later. It’s been one year so far and I’m completely happy with this product. I have no leaks and no problem with my window. I would buy this again.

Product was well packed and arrived promptly. Good expiration dates (May 2025). Placed adhesive tube in the sun for about an hour and was able to dispense easily using manual caulk gun with 18:1 thrust ratio. Completely satisfied with results

Once we used proper caulk gun (26:1) worked extremely well. Double check when ordering on whether need a T gasket or tube of Sealant when installing new windshield. Also helped heating tube with hair dryer before using.

Works really well. Warm up the tube if you are using an 18:1 gun. Electric gun works so much better.

The pictures show 2 tubes. The description said“ tubes”. Plural But in the product specifications it says you only get one Tube.It’s misleading

Works great and easy to use. Seals Windsheild with no leaks. Just prep area as directed before use also use a good gun to apply 26/1 and remember to V notch the top of the nozzle to get the correct seal

Used on a rear sliding window in a custom vehicle. Slider has a powder coated frame that I sanded down with 80 grit to bare metal and installed in a fiberglass surround. Was able to email and speak to a specialist that calls on body shops and has tons of experience to share on with how this product works with aluminum. Only paid $30 for 2 tubes and the primer which is far less expensive than other brands. Used one tube on the surround and that was too much. Very viscous product (first window install) so although I got the notching of the tube correct I put in too much material that made it difficult to clamp and then required excess trimming. End result is that the slider is in solid, doesn't leak and drains properly. Very pleased and tested a bunch of other materials (raw steel, polycarbonate, aluminum all to fiberglass) and they all adhere very well if primed with Dupont primer. So far this product looks like it will bond almost anything if prepped right. Plan to use this as my panel bonding product for building the rest of the vehicle.