NZXT H210 - CA-H210B-BR - Mini-ITX PC Gaming Case - Front I/O USB Type-C Port - Tempered Glass Side Panel - Cable Management System - Water-Cooling Ready - Radiator Bracket - Black/Red

good case

This is my first “modern” style case I’ve built. The last case I used is probably 10-15 years old now and let me tell you, the days of ugly interiors and sharp edges are gone.The back side of the case has guides for the wires, and the case was designed to hide the motherboard cables as much as possible.It fits a full size (ATX) power supply and does have enough room to hide the cables from a non-modular power supply. Airflow is good if you ditch the NZXT fans. They may be quiet, but they’re pretty worthless for airflow.There’s most likely enough room for a dual 140mm radiator. I went with a dual 120 because I wasn’t sure if a 140 would fit.Really my only complaint with the case is it’s difficult to find a water pump/rad that fits. I found one that’s 120mm and I had to do some funky stuff with fittings on top of the reservoir and it BARELY fits. Like, it touches on the top.Many people hate on the H210 case because it’s not a “true” SFF pc, but that’s mostly because they give you room to run a full size PSU and room to hide the cables.I still have some work do do with my wiring, as my power cables have no combs, etc. All in all, I would recommend this case.

NZXT CAM may need to be rewired on first use

Considering it to be an ITX case, I find it to be one of the most beautiful and sleek ITX cases. Installation is a bit hard since its a bit small in size but overall the thermals and cooling is sound.Edit:Airflow is not great around GPU causing it to go to 82C in 26C ambient. Please fix this!! Removing 1 star for this.

damaged from backside dont buy

Excellent case overall. Came packaged well and no damage. Has USB 3.2 and type C ports up top by power button. The cable routing in this case is very well thought out, especially with the channels to guide cables with velcro strap to hold them. Tempered glass side panel adds a nice touch if you want the internals visible. I did swap the (2) included 120mm fans out for two white LED fans. Accesory kit comes with everything you should need. It has an male to two female audio adapter (headset/earbuds). Paint job was excellent. Case is small but not nearly as small as some other ITX cases I've built on in years past. I put my Corsair H115i AIO cooler in the front easily. Fits large graphic cars to about 330mm or so I believe. I have an old Sapphire 270X in it for now and it fits easily. The only thing that concerned me initially is the tempered glass side panel. One screw to remove it sounds easy, but when you go to pull the panel outwards you'll think you're going to break the glass. I took a small flathead screwdriver and an old t-shirt to cover it for a pry-bar. It didn't take a lot of pressure and the plastic pegs on the glass panel popped out of the retainer holes. Just be aware if you go to open the glass panel that it will not just lay open easily. You'll have to apply some force to pop it loose. The front panel was a little hard to detach as well. Not bad, just take your time and slowly pry it loose. It reattaches mush easier than taking it off. Removable dust filters for Power Supply and behind the front panel. Overall, very pleased. A beautiful case and well worth it. You can get the "i" version with the LED lighting pre-installed for a few more $.