Diff Drop Fit For Tacoma 4runner FJ Cruiser, KSP CNC Machined T6 Aircraft Billet Aluminum Differential Drop kit with skid plate drop spacer fit for 05-15 Tacoma 4WD, FJ Cruiser 05-15 4WD, 4Runner 03-

Fits my 2003 toyota 4runner. After install, not much of a difference in the axle angle (3inch lift) but better than having full stress on the lifted axle.

A must if you plan on raising the front end.

Perfect for 2011 Tundra SR5 4x4. After I lifted my truck 3” I dropped the differential by one inch with this kit and it really helps the CV Axle geometry and not put as much stress on the joints.

The installation was pretty easy, no real instructions, but it's pretty obvious though. However, while it came with two bolts that were longer to allow the skid plate to reach after the spacers were put in. But, it needs two more longer bolts for the back skid plate. It isn't a deal breaker, but it was kinda annoying to have to go get one. You also need two more spacers, or, 4 larger nuts to go over the bolts to make a spacer. I wish I had pictures, but didn't think about it until I was finished with the installation.

Just installed this kit. 1. Main bolts that hold the diff up are marginally long enough. If I used the washer provided the threads would not protrude the nut! So the nylock bolt would be of no use unless you omit the washer. 2. The smaller spacers provided to shim the skid plate down are of no use. They are approx 1/4” thick. You need a spacer that should be the same thickness as the large spacers. 3. There were NO instructions in the kit. Not a problem for me but for some it may be an issue. 4. You will no longer be able to use the jack point on the skid plate as the kit spaces it away and provides no shim or suggestion to fill the space. Instructions or a mention of this on the sale page would have been nice! .....so I am now unable to run my skid plate till I get shims/washers to take up the space. I do not recommend this kit, to anyone. If it was in its allowable return timeframe, it would be returned!