2 Pack Pool Valve Actuator Micro Switch Replacement for Pentair Compool CVA 24 Product Name

Our pool waterfall stopped working. We had a pool service come out and tell us we needed a new actuator-a few hundred dollars. We researched online and found that the (two) microswitches often break. We replaced the microswitches with these and we now have a waterfall flowing again! Also, very easy to install. Saved a LOT of money, too.

Easy to install and well worth the price if this revives my old pool valve. Can't tell if it works since I paid to have a new valve installed. Keeping the old valve with new micro switch installed as a possible spare. Certainly the price is right for the micro switches. It happened again several years after having the pool tech come out and replacing the whole valve with a new one at a cost of almost $300. This time I was ready so I installed my old valve with the new micro switches and voila, it worked fine! Apparently this is a weak point with this pool valve and for $13 worth of micro switches, it's a no brainer to try the switches first before calling out the pool tech. If you're at all handy with your hands, it's worth the gamble that a micro switch change will cure your problem. Even if something else is the problem, it's still worth it to purchase a new valve and try fixing it yourself before calling a tech. You'll end up with a spare valve at worst but it'll come in handy should a valve ever go bad again.

All reviews were spot on. These little bookers solved my Pentair pool valve issue. I order a replacement CVA-24 valve because it stopped working in the wrong position and cause my spa to drain back into the pool. I ordered a valve just in case the micro switches did not resolve my problem. Low and behold thy worked. I will keep the valve as a spare. I saved myself at a least $250 to $350 on a repair bill by reading the reviews and doing the repair myself. Quick Fix! Thanks to everyone that provided reviews on this product, Go Pool Guys!! L.Stewart

OEM Pentair part costs ~$50 (which would also include cam actuator arms which seldom go bad), therefore aftermarket part a bargain. Easy to install however connectors narrower and longer than OEM part requiring slight crimping of the two actuator electrical fasteners for a snug fit. Can not comment yet on durability.

This was one of my best purchases. By me installing it, it saved me hundreds of dollars.

I was on my third replacement ComPool valve and did not want to purchase another especially with the plandemic price surge! I figured I’d give the microswitch replacement angle a try. Saved a bunch of money and they fixed the problem. Hopefully they last. Installed them about 2 months ago… so far so good.

Perfect replacement for the burned out switches on a Pentair/Compool valve actuator (CV-24T/L). Easy to replace, no wiring skills needed! These switches will save you money! No need to buy a new valve actuator...just replace the switches and it works like new!

I used these switches in a Hayward CVA 24 automated valve which was only turning one way. I had to remove the metal contact tabs from the originals and reinstall on these new switches which took a little pushing and prying to get them to pop in place, but they fit just fine. The valve is again functioning as it should!