1500024-WW

Vlotte levering en zeer eenvoudig te plaatsen. Mooi resultaat. Zeer tevreden.

I’m very happy with this bathroom light. For the price, the quality is really good and it has made a big difference in my bathroom. The 1500lm brightness is excellent and the room now feels much brighter. I can see around much more clearly, especially while having a shower, which is exactly what I wanted. It looks good, works well, and feels like very good value for money. Strongly recommended if you want an affordable bathroom light that provides plenty of brightness.

Producto genial. Recomiendo su compra 100%. Viene muy completo. Fácil de montar. La iluminación es perfecta para el baño. Tono cálido.

Facile da montare (queste plafoniere spesso non lo sono affatto), fa molta luce. L'ho installata sul terrazzo e per un utilizzo di questo tipo va senz'altro bene. Unico piccolo appunto, i morsetti di attacco dei fili a pressione, senza viti, ormai sono quasi tutti così a me personalmente non piacciono.

The light is nice and lit the hallway much nicer than my old fixture which burnt out those small global bulbs every month. There are a few things to care for when installing. It took about 10 minutes from start to finish, and I offer these steps to help you do so too. 1. Have a separate light source so you can see what you are doing. 2. Make sure there is at least 4 inches of source black/white wiring to be able to work it in place 3. Do not use the 3 felt feet as it puts a space between the fixture and the ceiling and it wont catch the bracket. I removed the old fixture and pulled the black/white wires out as long as possible. I removed the wire cover from the new light, and the mounting plate too I then used the 2 screws that provided to attach the plate to the existing mounting bracket inside the existing fixture. Make sure the new bracket sits flush to the ceiling and doesn't creep into the hole, else the flanges do not stick out enough and won't catch on the light. I attached the new bracket and stuck the wires into the holes (Black = L, white = N). I gave them a tug to be sure they wont come out. ** While now hanging from the ceiling I tested the light. I then put the wire cover back on. I had to use a stubby screw driver since you have very little room to work, but it only took 10 turns or so to get it in. ** Once it's screwed on test the light again!!! Sometimes the wire may come out if you didn't push it in hard enough. Then I lifted the light over one of the bracket clips (I suggest the one that is "closest" to the ceiling hole). If the light cannot "catch" the first clip, then you need to loosen the screw a few turns to allow the bracket to be less flush to the ceiling. Once I got the bracket under one of the clips , I pulled the metal "bracket release" and lifted the other end of the light and push it against the ceiling with some force to ensure it's flat. I then let the catch release go and it grabbed the light... took a few times. The light was then holding nicely and I was done. People complain about the battery cover being hard to put back on. If the wire out of the ceiling is too short then simply put a longer dongle/wire and you should be fine. People also complain about the light not being able to grab the bracket... you cannot use the felt feet and you may have to not tighten the bracket too hard against the ceiling. All in all it took just some care and an extra try or two to get it mounted. A little more effort but for the price it was worth it.