Eco Plastic 2 Way Adjustable 70mm Roller

A well built machine. I like the fact that it's made from hemp plastic. It rolls well, however it's a little bit clunky in that it's hard to open. On the whole tho' I like it.

Oddly enough, the RAW brand papers that should fit, are just the tiniest bit too long. But the JOB single wide papers fit perfectly. Which is perfect because the JOB single wide Hemp papers are the best smoke

70mm is my fav size because you smoke less paper. I love these adjustables because you can roll a regular fatty or a pinner. After I purchased my 1st one I ordered 2 more in case I needed spare parts as the pins on the rollers are tiny and reading complaints of fragility. Well after 4 years of use the only spare parts I've needed are the aprons/sleeves. People who are breaking these while rolling must be all thumbs and exerting too much pressure or overfilling the pocket.I have all 3 sizes and would recommend them all.

Every now and again I forget why I don't like this roller and I buy it. I like rolling skinny jays sometimes so I'm drawn in by the 2 size options.The size mechanism does work, more or less. With the handle up, you can roll pins, and with the handle down you get little fatties. It's not perfect but it does work.The rest of the design is terrible, though. The design makes it difficult to roll and rips the apron quickly. Changing the apron is a big pain. Overall I find it more frustrating than helpful. Stick to a standard roller.

This roller actually fits the Top 70mm papers I prefer. I ordered a Top brand roller and wondered why it was so hard to feed the paper, then realized the Top brand roller was actually a tiny bit smaller than the Top papers and I had to cut a sliver off the end of every sheet to use it. It is probably a knock-off.I bought my first one of these at a smoke shop but cant remember how long ago. Less than a year for sure. I actually broke it. People are right, the top pin closest to you can pop out if you put too much pressure on it, usually from overfilling. You have to find that perfect amount so your cig is not loose but also not too tight. If the roller is hard to roll with what you have in it, its too much.I pushed it too far and the roller popped out. I used a knife to try to pry it back up and thats how I broke the size tensioning pin. You can roll a cig without it, but they are huge fatties. Might impress your friends with some "plant material" in it, but I'm just trying to roll actual tobacco cigs that will fit the plastic tip style filters I use.I dont use the small size setting at all, I just like that it fits the papers I like and the rolling "belt" has the right amount of surface adhesion to grab the papers and roll them right. Other rollers I have are slippery and roll too small of a cig to fit my filters.I'm ordering another spare right now while they are available. I only gave 4 stars because of the pin slipping out issue and the instructions require me to use a magnifying glass WITH my reading glasses to even think about reading them. Also the photos on the instructions are hard to see because they used gray paper.My roller came with instructions and an extra belt as it should have, and a plastic cover over it, which I like because who knows where these things bounce around before you get them!?

I was impressed with how nicely this roller worked. My cigarettes were smooth and looked almost professionally done. It also gives you the option of rolling a thin cig or a thicker one in case you like to share.

I love this roller. I had the same roller previously for about 2 years before the plastic started falling apart. I couldn’t find a replacement in stores anywhere, but I found it on Amazon. I love the fact that you can adjust the size of what you are rolling- skinny or fat. And this one came with a replacement plastic piece as well, which my previous roller did not. I expect this to last for years and I tell everyone about it.

It looks presentable but the roller skin is to long every time you roller the herb comes out and it is way to small for the raw rolling papers you would have to cut it about a centimeter for it to fit properly in the machine! POS!!!!! But good packaging!