🏕️ Elevate Your RV Experience with Style and Protection!
The Dicor RP-CRC-1 EPDM Rubber Roof Acrylic Coating is a high-performance, waterproof solution designed to extend the life of your RV's rubber roof. With a coverage rate of 1 gallon per 125 sq. ft., this stylish white coating not only enhances the aesthetic appeal of your vehicle but also saves you time and labor costs. Ideal for retrofit installations, it ensures compatibility with EPDM and PVC materials when used with Dicor's Rubber Roof Cleaner/Activator.
Manufacturer | Dicor |
Part number | RP-CRC-1 |
Item Weight | 5.44 Kilograms |
Product Dimensions | 20.32 x 16.51 x 16.51 cm; 5.44 kg |
Item model number | RP-CRC-1 |
Size | 1 Gallon (Pack of 1) |
Color | white |
Style | Part 2 Acrylic Coating |
Finish | High-Gloss |
Material | Acrylic |
Pattern | Roof Coating |
Item Package Quantity | 1 |
Coverage | 125 square foot |
Special Features | Waterproof |
Included components | Dicor RP-CRC-1 EPDM Rubber Roof Acrylic Coating Part 2 - White, 1 Gallon |
Batteries Included? | No |
Batteries Required? | No |
R**D
good product-well priced
sealing
R**M
It's only a quart ...
As a number of others have mentioned, it is only a quart even though the pic looks like a gallon. It covers 50 sq feet ... Who has an RV that small. They should be up front with the information at that prict. Very, very expensive! Mine arrived late for applying before my camping trip. So I'll have to re prep the roof again after I get back from camping. The Roof Coating was in an old can with a rusty lid. It came open and spilled some out. I don't know how muc as I'm not opening it until I get the primer on. Second pic is 2nd can of Roof Coating ...
J**E
Good
It's wa not packed properly it fell over and leak a bit
D**.
Pleased with Dicor rubber roof cleaner
Arrived quickly after ordered. Good instructions. Easy to apply and wash off with pressure washer. Pleased with the amount and ease of dirt that it did lift and remove.
J**K
Good stuff!
This tape is excellent for its intended purpose. It covers seams on your rv roof just like eternabond tape - I am guessing the adhesive is very similar or the same - and once it is in place you have to work to remove it so be prepared. The external surface is fibrous and accepts and holds the new coating/sealant you are putting on your roof. I put 1-star for "easy to remove" because it is not, but that is an advantage - it is what the tape was designed to do. If you read other reviews, there are those who give this low reviews because it is somewhat difficult to install. Compared to the above mentioned eternabond tape etc...it is a much thinner product as it is designed to be placed on the bare roof and then covered with a new coating; whereas the eternabond tape already has the exterior coating already as part of the tape so it is much stiffer- but that coating is slick and does not hold a new sealant very well. But since this tape is thinner it also will fold upon itself much easier and if the adhesive side of the tape comes in contact with anything, especially itself, it adheres immediately and quite strongly! Good luck on getting it apart. I ended up losing several feet of this material as a result of that happening, but I do not find it to be a fault of the material. You just need to pay very close attention to the installation and plan well ahead and this stuff doe the job it is intended to do very well!!
ترست بايلوت
منذ 3 أيام
منذ يوم واحد