LKVR1200GS Tool Box Motorcycle Left Side Bracket with Stainless Steel Case Replacement for BMW R1250GS LC ADV Adventure F750 F850

I like that it is large enough to fit my tool kit, puncher repair kit, tire inflator and couple of other small items. I installed it on Touratech racks on my BMW 1250 GS, however, I switched the brackets the other way around to get it fixed, I could drill 2nd holes for the bracket to fit it with two screws but it was solid enough with single bolt at each side. Overall I'm happy with it.

The installation was a pain because of the bracketsbracket.... but after getting some help from my riding buddy we finally got it installed. Took my first long distance ride and the thing just broke apart! I would like a refund or a replacement but I not sure if that is going to happen or not! My recommendation is "buyer beware!."

It came quick and is built well

Box is all plastic but will get the job done. The clamps are two piece and very subject to failure. Screws are to long so I kept the box and purchased new clamps and screws.

Hope I'm wrong and the zip ties weren't needed but assembly was a challenge, needed a 3rd arm, and had to use the extra nuts and screws to plug the other holes so it has a chance at being water tight. Living in the northwest that test is coming soon.Just taker a moment and Google dovetail joint and you won't see that space on the joint that you do in the photo, where it looks like its pulling apart, dovetail joints shouldn't do that.I'm riding more than ever before, about 800 -1000 miles a week for work from from late April to early October. Bike is a 2019 r1250GSA. I'm crossing at least two mountain passes during every trip. That last thing I want to worry about is if the extra storage compartment mounted next to the rear tire is coming lose when I'm going 80+ mph.The fact that I had to use 3 hands, add 2 zip ties, and use the extra screws and nuts to plug the four (4) other unused holes to make sure it might then be water tight is why I gave it the low rating, I'll check every week and maybe I'm wrong. I almost used plumbers tape, but decided not too.

The box looks sturdy - look like the touratech one basically .I mounted on the touratech panier rack on a F850 gs . I still arrive to clamp on the touratech alu case !Main real concern is the quality of the clamp that hold onto the panier . Time will tell with some off-road in the tool bag finish on the floor..To avoid the inevitable, I ll ask the supplier to upgrade this and send me spare!The assembly highlighted in yellow on the picture shall be more precise and the clamp need to be thicker.

Well I really wanted this to work. The box itself is ok, but the hardware that comes with it makes the installation on my 2022 R1250GS Adventure impossible. Here are the 2 main issues:1. The bolts are too long for the capped nuts that the installation instructions call for. This means that you can't tighten the bolts enough for the mounting plates to be tight. The bolts reach the end of the capped nuts well before tightening the plate. Some videos online mention 2 different length bolts which would solve that problem, but the bolts that came with mine are all the same length.2. One of the clamps (the one that mounts to the pannier frame near the opening of the box) is too large and will not tighten around the pannier frame.I will be requesting the right hardware from the supplier and if no response, I will be returning this.

Goods arrived on time and as described

DE MUY BUENA CALIDAD Y RESISTENTE

Queda todo muy bien y cumple su objetivo, solo la tornillería no es la adecuada , ocupa unos más cortos y la tapa con llave si la jalas con un poco de fuerza se abre hay que asegurarla para evitar se tire

The box quality is just OK but you will have to make some upgrade. I had to unscrew every single bolt around the box to separate in half the box, put a line of black silicone all around the edge and put again everything togethe. Otherway water will eventually get inside your tool box and corrode everything inside. The brackets that hold on to the bike frame have to be upgraded because quality is not the best AND not more important.... You will have to buy some bolts because The screw seize that come with the box are too long and will not hold tight the two plates because of the caped bolts.