135 PCS Plumbing Rubber Washers Assorted Kit and Flat Silicone Gasket Assortment Set with Screen Filter for Faucet Shower Head Washers Garden Hose O Ring Hot Water Pipe Seals Replace

THIS IS A GREAT PRODUCT! IT HAS MANY DIFFERENT SIZES AND EVEN GRADEN HOSE WASHERS AND I WILL BE REPLACING SOME!I NEEDED A WASHER, THAT I LOST FORM MY WATER LINE TO THE FRIDG AND IT HAD THE RIGHT ONE!YEA...WE NOW HAVE WATER AND ICE AND I HAVE A BUNCH OF EXTRA WASHERS, JUST IN CASE!PS. YOU CAN'T HAVE TO MANY WASHERS!

Exactly what I needed. I recently (couple of years) moved in to a house and multiple hoses would leak/squirt you when using. I was finally tired of it and ordered while watering plants. I was able to fix three different issues with this set. Well worth it.

This product was exactly what I needed! The various sizes really came in handy when the size of the washer I thought I needed was actually too small. It made it so much easier to have the right one already with me and not have make another trip to the hardware store.

Great assortment to keep on hand for the occasional leaky household faucets.Very difficult to find locally and it's inconvenient to have to stop a quick fix and run to town from our rural area.

They are what they are. I was able to use one and it worked well. I needed one that I'm pretty sure is not available. I'll need to buy the whole hose bib to eliminate the leaks.

Don’t over tighten the silicone washers as they will deform. I don’t think this is a quality problem but true to all silicone washers. FYI

I really like this assorted plumbing wash your kit.

96 pieces is impressive, but that is not as important as SIZES. The pack's # of Sizes is actually 5 (not 10) because they are duplicated in FLAT and BEVEL washers (so 10 is technically correct but not functionally).As such, the 5 sizes are OK for "average faucets" like shutoff valves. For people with potable water faucets (like kitchen & bath), if you are handy enough to replace worn faucets, you should bit the $ bullet and replace those fixtures with new hardware with ceramic cartridges that should last as long as your remainder of your life.For shutoff valves that are occasionally used, it is cheaper and faster to replace the washer seals with this washer batch then remove, install and solder in new ball valves.I have 3 remainder shutoff valves (for outside garden faucets and balcony, requiring shutoff for my Winters below 32d) that are still multi-turn using these washers, and this set of 5 sizes covered only ONE of the 3 - this set of 5 sizes didn't have 2 "too small" and "too large" sizes that I needed. For the "too small, I used the bevel 3/8S (smallest in the set) and flipped it to fit the holder and used the "flat end" as the seal.The 3 + 3 (2 sizes) bib screws are a nice touch, and I did replaced the old screws with this set. I needed 1 standard and 1 large diameter screw.To fast forward, the bib screws are VERY useful, and that could be a couple of $ value. The 5 size set is too narrow of a range, and there's no need for BOTH flat & bevel; either one is OK with the BEVEL I think lasting longer & potentially less prone to be overtightened (due to shape & bigger material size).I ended up also buying the DANCO 100-peice set which are all FLAT, but have 10 sizes of washers (with 0 and 00 smaller ones than this TWCC set). The Danco set doesn't have: bib screws or a nice size organizer tray, and cost $2 more. Therefore, depends on your needs if this set or the DANCO set is better.