LZLRUN K+CAN K+DCAN Car Diagnostic Tool Cable OBD USB Interface for BMW with FT232RL NCS Coding Winkfp Tool32 Programing (with Switch)

CD is not working

Good quality

Ordered this cable to use with INPA and it works without any issue. Has the switch on the cable which most online instructions say is needed. No complaints here.

But you need technical support. I still have yet unable to download this software for my BMW.

From what I understand, some 2007+ cars require pin 7 and 8 to be bridged together for this connector to work. This cable comes with a 4-way jumper that allows to enable or disable the feature. I couldn't figure out why it was a 4 position switch so I took it apart to see what was up. Am I glad I did! First of all, the positions are as follow: 1: Pins 7-8 jumped, 2: disabled, 3: disabled, 4: disabled. The workmanship is so poor, I expect this involved child labor. The wires were overstripped, had incredible tension at soldering points and I can tell there was no flux involved, it's just a dab of solder and call it a day sort of thing. They even managed to pinch one of the wires while putting it back together, making it a high risk of shorting on the circuit board or just breaking away and then shorting. Don't expect me to use this to code ANY car, let alone a BMW. I pulled some readings on a 2007 328XI so it does work, but I don't think it will last very long and won't take any chances until I fix the butchering job that was done upon the modification.So in summary, the connector is fine, it works as it should. But the modification is a disaster waiting to happen. The CD includes most known softwares, but I'd rather grab the install pack online. Don't forget to set your connector to COM1 and Timer latency to 1 in your device manager.

Tried installing the software on two different computers and they both said it contains a Trojan virus and neither computer would allow installation.