Official Ender 3 V2 Heated Bed 3D Printer Replacement Hot Bed 220W 24V with Cable Compatible for Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Neo, Ender 3 V2 Neo...

Easy to install. Works great!

Immediately fixed why I was having trouble calibrating the bed. I ruled out every possible cause first before buying this. I think what happened was after I changed out the glass build plate with a magnetic sticker, I came to realize that my print bed was warped from the very start from when I purchased it. I could not find the warranty since I think I threw it away but I rather waste time fixing the issue then trying to find what could help me fix the issue.I recommend anyone with an ender 3 v2 printer that is having calibration issues to check for warpage in the print bed since this issue can waste a lot of time if not solved correctly.P.S. If your connectors are hot glued you can use 99% alcohol to easily remove the glue from the connectors.

The stock ender 3 v2 beds are warped 9 times out of 10. I absolutely could not verify this until I replaced mine. Also, the stock plastic mount piece originally was trash. This one the plastic feels the same but it's way more rigid; I dunno how to describe it best.I mounted this on my printer, reset my z axis and all that jazz, the wiring was super easy you just swap black for black red for red, and replace the 3pin wire - easy peasy.This was a much needed 'upgrade' or 'replacement'. I already see the quality improvement on my prints.

It works perfectly with my v2. Glass was not worked and my prints stuck pretty well. I'm still using this one today and I've had no trouble with it. It was super easy to install and stayed well once the clamps was placed

I started with Ender 3 Pro, but after a year... my bed seems pretty warped.I am told that Ender Beds a known for coming warped already.I think there are a lot of factors at play here.We you are dealing with an electronic probe that's measure down to the Thousandth of a millimeter and people want it to be the same measurement all around...I just don't think a small thin piece of aluminum will ever be completely flat.Anyway, It's not perfect, but it's better than what i had!My only other option would have costed almost 100$

Purchased to replace our beat up bed on an Ender 3 V2. Exact match to the one we had. The easy to remove rating refers not to the bed (it is the glass or metal cover of the bed that would apply to anyway), but the fact that replacing anything on and Ender printer that attaches to the motherboard is not the easiest thing to do. No real issues, just a bit time consuming.I would recommend updating the springs and screws as well. The stock leveling springs and wheels are a but weak when it comes to holding level.

If you have a printer this fits it’s a good replacement part

It had slight deviations in the surface , but overall it was extremely flat compared to the stock bed on the ender i had. Much better print quality, heats up fairly quickly and works well

It worked with my ender 3 v2 perfectly