InSinkErator RSB-00 Removable Sound Baffle

The sound baffles on both of our Insinkerator disposals were shot so I was looking for replacements. I found several different possible baffles - there's this one that was claimed to fit everything *except* the Evolution models, the "one piece" gasket version for the "badger" series (this is what our ProSS came with), and the new "anti-microbial super secret special expensive baffle" that "only fit the Evolution series". There were a ton of reviews, all providing conflicting (mis)information. It was extremely difficult to figure out what was right. This baffle, the RSB-00, was labeled on the package as working with a wide range of disposals, including our ProSS. The Evolution was *not* listed on the package, even though our Evolution disposal originally came with this baffle! When we installed it we replaced the original baffle with the anti-microbial one to match the one our older ProSS used, and put the original RSB-00 in a drawer. I compared that baffle with this new RSB-00 and it is identical. Both the Evolution Essential and ProSS have the same size disposal neck. The RSB-00 installed easily into the Evolution, fitting perfectly over the steel retaining ring. Our ProSS has one of the one-piece baffles installed so I used a matte knife to cut the original baffle out. Once the original baffle was removed the RSB-00 installed easily over the steel retaining ring and fits like a glove. I really like the look of the RSB-00 versus the "upgraded" anti-microbial model. It works better, drains faster, and as near as I can tell the disposals aren't any louder than with the "upgraded" heavier model. The ProSS has always been loud (definitely louder than the Evolution) and with the old degraded baffle it was even louder than normal. With this new baffle it's nearly as quiet as the Evolution, and doesn't splash water out of the disposal anymore. That's a huge upgrade in my opinion! I'm really happy with this purchase. I bought two because I didn't remember we had one already - that just means we have a spare on-hand for when these need replacement.

What a difference with this magical little wonder. I was always so frustrated with that pleated one that is installed with the disposal. It would be a battle to get stuff to go down the drain and the water would hit one of the pleats and always splash back at me. I constantly had to remove it to clean the underside because it was always full of gunk. I started searching around and I saw this replacement. It fits my drain perfectly. The food goes down easily. Nothing gets stuck. I don't have to spend five minutes trying to get everything pushed through. It also doesn't make the water splash back at me; it flows easily through it. It's well made, simple to install and it makes using my disposal so much easier. There's no odor. No garbage collects on the underside. It just works. It's really great.

A perfect fit, removable for cleaning, it alleviated the need to replace our garbage disposal.

My only problem with this item is that it doesn’t come with the garbage disposal I bought, and it should. I thought my plumber did something wrong because the water was still backing up in my sink after installing my new garbage disposal. This solve that problem. Highly recommend it. And no, I did not notice any sound difference. Doesn’t sound any louder to me.

You know that new garbage disposal you put in and now the water backs up in the sink and you can't get food down it? The problem isn't the disposal.... it's what this fixes. So here's what happened between your new disposal and when you put in your old one. The manufacturers got into a competition to see who could advertise the quieter disposal, and some genius figured out that if they block the hole with backed up water and food, it stayed quieter. Which makes as much sense as wrapping your head in a beach towel so nobody can hear you breathing. What this does is universally fit every major garbage disposal collar being made. Holes in the edge prevent the air lock that happens with the unit supplied with the disposal. No trimming is necessary. Your garbage disposal will be a little noisier with this one, but it won't back the water up into the sink and air-lock. It's the choice behind making it work and be slightly louder, or having a quiet disposal that doesn't work. If you need another reason besides function to make this happen, consider that the less time you're messing with it, the less water you need to run it. Voila! You get less angry AND save the planet. Win Win

Like many that found their way here I purchased a shiny new and very expensive InSinkerator disposal. Great news - it's super quiet! Bad news - the stupid baffle has a 1/4" hole and water hardly drains through it and it cannot vortex foods down through the baffle. I called the company, they said there's no other baffle they offer. Found this product online, ordered it, and I swear the packaging was labels as made by InSinkerator. Surprise! Anyway, easy install, water now drains much quicker, it can vortex most food down, but is still stiff and restrictive enough to prevent silverware from falling into the disposal. You do give up the whisper-quiet behavior of the factory baffle. But that's fine.

After finding all the "easy" ways that one can replace the splash guard / sound baffle on my 20-year old 777ss-1 Insinkerator, using stools, piles of books, shims etc., it occurred to me that there had to be a simpler solution. Well, this thing IS that simpler solution. By far the most difficult part was getting the new splash guard out of its original packing, and that took a pair of scissors and no more than thirty seconds or so. Once it was out I put it in the sink. It fits perfectly, easy to push into place yet tight enough that it is firmly there. Some, but not that much, noise reduction, but my purpose was to avoid splash-back and that works perfectly. Question to Insinkerator: Why not have this kind of splash guard from the beginning, and make life easier for your customers?

Fits Insinkerator Revolution Pro 750. The original would block water flow and catch food bits in the folds which required weekly cleaning of the slime that accumulated in every single crevice. Since water would get backed up, the sink would never rinse completely clean and also required constant cleaning. This product solves all of those issues! It might not baffle the sound quite as well, but the easier cleaning is worth it.

Fits in my Badger InSinkErator no issues.

Llego rápido y como se describe

The previous stopper was 30 years old and rather worn so we did not notice that the macerator had become noisy. The replacement has made an amazing difference considering it is just a moulded piece of rubber. It also fits snugly so no more food clogged in the rubber

Took it out of the package popped it into the sink hole, and its working great.

My original insinkerator one that came with the garburator was annoying... didn't let much through, not even water. This one fits perfectly and I am finally able to use the garburator as intended!