HATCHBOX PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Gold

This PETG filament has very good quality. It feeds smoothly, adheres well to the print bed, and results in strong, reliable final parts with minimal stringing. The dimensional accuracy is excellent, leading to consistent and hassle-free prints every time

Having only recently got into 3D printing with a Bambu Labs printer, I found their lack of PETG stock frustrating and looked elsewhere. Finally settled on Hatchbox due to reviews, and I'm glad I did. It's now become my go-to filament brand. Great colours, prints really well (even on standard Bambu Lab) presets and even better once dialled in. Spools are neatly wound, and as they're still plastic they work fine in the Bambu P1S AMS.

Printing using an Ender 5 Pro in an enclosure, stock hotend & PEI sheet, the adhesion is really good but not too good! (just need to pop the PEI sheet off and flex to release print), the quality is pretty good, some stringing but really depends on the printer & setup/config, colour comes out really well, very similar to the purple colour the joker wears in Batman 1989!

Freshly opened packet and it won't stick together. I dried it for 5 hours and exactly the same. Im printing at 22vfr. (volumetric flow rate) Ive had to drop this to 4vfr to get the filament to stick, so its not on par with other PETG's. it does now stick - so be warned its a 50mm/s print speed filament. Really disappointed, considering the cost. I used some similarly priced petg filament after this and it printed perfectly at the intended high speeds, so it's ruled out the printer causing the issue. Update - Hatchbox support dealt with the issue and I am now satisfied with the result. Great customer support!

It's good value filament with a good range of colours that works but like all filaments only if you calibrate for each because they're all slightly different. For PETG and PLA I mostly stick to Hatchbox to save making another profile. I've never had any problem with bed adhesion on my textured plate so can't comment. I just wipe it with a microfibre cloth and 99% IPA before and after each print. I've done 100s of prints and the pate looks like new after a one year plus. I use PLA, PETG and TPU.

Purchased it with a 20% discount so good value too. It would be a little expensive without the discount though. Good that it comes on plastic spools as I need these for my Bambu Labs AMS.

Worked wonders for the prints I've been wanting to do..

nice pla used it in my bambulab machine no issues whatsoever