trueCABLE Cat6/6A RJ45 Pass Through Modular Plugs, Shielded (STP) External Ground Connector, UL Listed, EZ Crimp, Gold Plated 3 Prong 8P8C, 50 Pieces

I made the mistake of buying other connectors to save some money, and it wasted so much of my time. I used these with TrueCable CAT6A shielded cable to run HDMI over CAT. Other connectors had poor fit in jacks (hard to get that click), had tons of noise still, had loose connectors, and robbed me of literal hours of time because of how hard the pass through was to get right.These were simple. Line my conductor wires up and the slid right through. Easy to verify, easy to crimp, tested perfectly, worked perfectly with no noise. Even when used for HDMI (HDMI is much more susceptible to noise), they just worked. Fit in jacks is perfect, easy to remove, etc. Didn't think I could be so impressed by something so simple. but it was just such a relief.I only wish they could sell these at a sub $1.00/piece price without having to purchase so many

to get this to work you will want to strip the outer coating of ur cat cable to expose a good 3 inches of the twisted pairs before trying to poke them into their designated holes one by one working from one side to the other in the connector. other than that these work great, just requires a bit of patience.i won't bother to dock any points in my review because that might make these compete with so much other stuff on amazon with terrible quality. the quality on these isn't bad, you'll just need a bit of patience to deal with the design.

Used these on a Cat 6 cable that 2 other “cat 6” connectors would not fit into the pass through hole on. These connectors fit great and are very sturdy.

Difficult to pass the wires through. Takes a lot of patients especially with Cat6a. Other brands seem easier.

Over the years I've been using the same plugs that I bought in bulk, which have always worked fine, but the slots for the wires are all very tight and difficult to work with. It was "good enough" for the occasional wiring but I had a lot of ends to terminate recently so decided to try these. I wish I had done this a long time ago. It's exponentially easier to run the wires through, and the staggered slots make it so much easier to get each wire through the subsequent one. I probably cut down my effort by AT LEAST 75%, especially when factoring in using their All-in-One tool as well.

Works well for larger awg wire

No issues with MonoPrice cat6a or True cable Cat6 shielded cabling. Easy to passthrough 23awg wires. No issue with crimping (using Truecable crimper). 10 I've crimped so far has passed continuity test; connected at 10G or 1G POE++ with no errors seen on switch port or PC NIC. Camera connections are stable.

So these are the EZ (passthrough) type connection. The entire reason to buy this type of connector is to help guide you through inserting the wires and not accidentally crossing any. But - the guide holes are recessed so deep into the connector that you cannot use them and you find your self just stabbing at them - hoping they go into the right holes.Also - there is no crimp at the back to secure the cable into the connector - other than the ground.I am returning the ones I ordered - these are just awful!