Prewired Electric Guitar Pick Guard Loaded SSH Pickups,3-ply Pickguard with Single Coil Pick-up Humbucker PU,Scratchplate with Alnico v Pups 5-way Switch & Control Knobs for Fender Strat

liked the sound and fit for homebuilt guitar. drilled my pickguard holes because the guitar was a home build so i can not say how they would line up on a replacement body with predrilled holes for the pickguard. pickup ohm resistance was very close to the advertised value of the pickups.12.71k, 7.75k, and 7.72k. better sounding than many of the cheaper loaded pickguards like the one in my squire stratocaster.

There was a weird issue when I first got it where it would still pick up audio with volume all the way down but it seems to have sorted itself out. Sounds decent and easy enough to install (squier strat hardtail)NOTE that the hard tail bridge is wider than the standard trem bridge, I had to sand the bridge cutout a bit to get it to fit.

Added to my Squire 50’s Vibes Strat. Only one hole lined up so I had to plug 10 holes (q-tip shaft and wood glue) and pre drill 10 new ones. Be careful to get the pickup magnets lined up directly under the strings before predrilling .Also had to nip about 1/4” off the hum bucker height adjustment screws because they were bottoming out inside the guitar before the pick guard was flush.Most important thing is that the pickups sound excellent. The selector switch, tone and volume pots seem like better quality than the squire electronics also. Smooth and no crackles. Very much worth the extra effort to get it fitted.. Sounds about as good as a $350 name brand setup.

Pickguard installed fine on my Squier Bullet HT strat. I did have to file down the bridge slot a bit on the left side to accommodate the wider HT bridge, but all 11 original pickguard holes lined up after that. A nice upgrade to the ceramic single coils that it came with. Humbucker sounds great and the single coils sound as expected.

I put the Lamsam pre-wired pickguard in my 99 Squier Strat. Turned this guitar completely around and into a Beast!! The Humbucker Rips. The Single Coils have that classic bell tone. Totally Amazed and blown away! Wow!! Easy to install. The Only thing I had trouble with was getting the volume and tone knobs off to pull protective wrap off. Thats it!!! Thank you. I'll be looking into your other products soon.

Good sonic upgrade for a $80 Squier Affinity Strat ICS FROM 2017. See the actual readings for the pickups in the pictures. The holes in the Pickguard did not line up so I used an Allparts one I had laying around.

sounds good, the humbucker didnt fit into my body so I had to change the screws. The issue was my guitar not the pickguard. It sounds good

I cannot distinguish them from name brand units that I have. I will buy more!