PERFORMANCE TOOLW1141 Quick Fit Fluid Transfer Pump for Vehicle Engine Oils and Lubricants, Black/Clear

I used it to fill my transmission and differential and it did it perfectly. Used the short suction tube and fit on Amsoil and Motorcraft quart bottles without a problem.

I bought this to pump 90W gear oil from a 5-gallon bucket to smaller containers for recycling. The hose ends are just pressed on so I went ahead and put 1/4" hose clamps on both ends before I used it based on the mess others reported. I'd say they were correct because although it seems like low pressure when you are pumping heavy oil it creates a lot of pressure in the hose.**NOTE: The free HF 5 G buckets are NOT standard size and this will NOT fit the top. The HF is larger in diameter. TSC buckets and WM buckets are the standard diameters that will accept lids and this pump.PROS:1) I pumped heavily sludged oil with this from an old Farmall H with zero pump/hose leaks. You do need to pump more slowly the more heavy the oils is otherwise something may give. The bottom line is it will work.2) The pump slides up or down in the lid in case you don't want to be right on the bottom.3) The pump has stand-off feet to maintain an air gap if it is on a flat bottom.4) It saves your back and prevents a major mess trying to dump 5 G of oil into a funnel on a smaller container . . . I know.5) Zero leaks6) PriceCONS:1) you need to supply 1/4" hose fittings to reinforce the hose connections.2) The hose is cheap PVC, but it worked for me. I'm not sure how long it will last and trends to fold where it comes out the top of the pump, however, the pressure expands it open.

Me funciona a la perfección

I purchased it to change the oil on my outboard. But works on any oil change. I love it! Who said women can't change oil too! :p

Parfait

Easy assembly pumped the liquid without any issues