NADAMOO Tub and Tile Refinishing Kit (1kg / 35 oz, with tools), Bathtub Sink Countertop DIY Paint Kit for Bathroom Kitchen Porcelain Fiberglass, Semi-gloss White Coat

I normally don't take the time to write reviews, but I'm so impressed by this product that I am making time to help others in need of a good tile paint. I'm a professional handyman and was hired to paint two bathrooms - both the wall tile and the floor tile. In the past I have used Rust-Oleum tub and tile paint - but man did that stuff STINK. The fumes were so strong I had a headache for days and it was hardly possible to finish the painting. I was dreading this new project thinking I'd use the same paint, until I found and used this paint on Amazon. What a difference! Not only just in smell (this paint is barely noticeable in smell and less smelly than typical wall acrylic paint), but this paint is so much easier to apply than Rust-Oleum. I believe it did take an additional coat more than Rust-Oleum but it's well worth it not having to breath in harsh fumes, coupled with easy application. I did struggle with knowing how much paint to buy for my project, but 3 cans of the 35oz product was more than enough to paint about 3 coats for each bathrooms' walls and floors (1 small and 1 medium bath). I used the brush that came with the tools which worked better than my other stiffer brush, as you will want to use a soft bristle brush for this paint. It took about 3 coats and in some spots, 4 coats to get the tile just right (I was painting over dark brown tile, so if you have a lighter colored tile, you should be able to get away with 2-3 coats). I used an orbital sander and the sandpaper that came with the tool pack option. I didn't go crazy on the prep work - just make sure you get a decent scuff with sanding and a good vacuum/wipe down and you'll be good to paint. I will definitely be using this paint again if I need to paint more tile.

This truly is the best Tile Paint you will find for your bath or shower. I have previously tried Epodex and Rust-Oleum on this project and both did not adhere! When I ordered and applied Nadamoo's tile paint it was very easy to mix and apply, was odorless, and left a nice thick, clean finish. Overall, this product works great and I plan to only use this paint going forward given it's ease of use and value given it's low cost.

I've painted my tub 3 times. The first 2 times I used Rustoleum (I had to "fix" the first attempt) and I'll never go back to it after using Nadamoo. My comparison are specifically for these 2 kits.1. Finish - Nadamoo has a more satin finish compared to Rustoleum's gloss finish. I didn't realize how much more I prefer Nadamoo's finish simply because it hides imperfections. My tub is a 52 years old basic fiberglass surround tub/shower that they put in every raised ranch built in the 70s. It's beat up and the Rustoleum caught every last one. Nadamoo did not. It didn't hide everything but the satin finish is very forgiving. Also, Rustoleum can leave finish inconsistencies because of the gloss. Nadamoo avoids all of that with the satin-like finish and it's beautiful2. The paint itself - this was the deciding factor for me. Rustoleum's kit requires you to work fast while using too many foam rollers. The Rustoleum paint would start to dry/harden as you were using it and the roller would get stuck to the tub and be ripped apart leaving little foam bits everywhere to pick out. Very annoying. I went through am entire package of foam rollers with Rustoleum. I could have used the same roller to do the entire tub. I didn't, but I could have. The Nadamoo paint, even with the harder added, stayed in liquid form in the container with the cover on. And there's no rush to paint as quickly as you can. I don't know about you, but any added stress when DIY-ing can lead to, well, having to re-DIY. Not my idea of a good time. Strategy is important when using Rustoleum but this isn't the case with Nadamoo. You still need a strategy but it's much less rigid since the paint doesn't start to dry immediately.3. Cover - Rustoleum definitely has more cover than Nadamoo. But that's because Nadamoo is water based. It took 2+ coats since there was some patching needed before I painted and Bondo doesn't hide very well under white. I used the Nadamoo to "prime" the patches and it needed 2 priming coats. Then I put 2 coats on the tub. But you get more paint with Nadamoo than Rustoleum so there was more than enough paint for all of this. After seeing the finished product, I didn't care about needing more for coverage. It could still use another coat especially on the Bondo bits but with the curtain drawn, it's darker in the shower and I can't see it. And if I can't see it, it's not there. 😁4. Odor - Nadamoo has no odor other than smelling like latex paint. Rustoleum? Windows are open, masks are on and headaches are had.5. Affordability - Nadamoo sends you everything you need. Well, ish. I didn't use the included foam roller and roller handle. But the plastic edged masking tape, the sandpaper and spreader I did use. Could they leave these things out and charge less? Absolutely. I used them because they were there but could've gotten by with out them. But if someone doesn't have any painting supplies then the included items might be helpful even though we all know included accessories like that are usually garbage. Otherwise, I found Nadamoo to be more affordable than Rustoleum.End result? I'd repurchase Nadamoo over Rustoleum because the finish doesn't last, it's much more difficult to work with and I'm nauseated thinking about the odor right now. In all honesty, I really hope to never have to paint another tub ever again. But if I have to, I'll use Nadamoo.