1PZ CF1-E01 H7 LED Headlight Bulb Adapter Holder Socket for Hyundai 2017 Mistra Tucson KIA Carnival

It fits perfectly to my 2020 hyundai Tucson luxury 2.4l

A good product but expensive.

If you are planning to upgrade de stock bulb to LED bulb, there is NO WAY that you can do it without this adapter… it easy fit in (dunno why some reviews says it will not) and the plastic is strong. THE ONLY issue is that you have to add some glue/silicone to the bulb ring to atay firm on the plastic adapter… thats all! Installed in 10mins . I recommend it

So many issues here...1. EDIT: My initial review was somewhat mistaken that this was not the right adapter for a 2016 Kia Sedona - this *is* the correct adapter for the low beams on the 2016 Kia Sedona, but a different adapter would be necessary for the high beams.2. Does not hold the H7 bulb securely to begin with - maybe on some cars the installation will press the plate on the bulb assembly to the adapter in such a way that it is secure, but if you are counting on this to hold the bulb itself, it doesn't do it well - you can click the H7 plate into it, but it pops back out if you look at it funny, and it's essentially impossible to install the plate even to that point without removing the bulb from the bulb baseplate.3. It's cheap and fragile - just trying to get the bulb to mount to this cracked one of the clips off of it with very little force.Save your money, look elsewhere.

So i used this for a 2017 Hyundai tucson. It fit fine, and could even use the oem dust cap. Only down side is that the lights retainer that clips onto this adapter falls off before you install it, and even if you manage to install it, this might come lose inside the light housing so thats no good. But all i did was glue the retainer onto this adapter. Then i installed it. So far it hasnt fallen off. I used the loctite gel glue. Just make sure you use a strong glue. But after its installed the only thing that will cause it to fall or break lose would be better vibrations. Its a bit harder to install than if it didnt need an adapter but its possible. The hardest part was probably taking off the old lights and plastics.