LTC 12V Racing Car Ignition Switch + 4 Blue & 1 Red Car Engine Start Push LED Toggle Button Panel for Racing Car

Great quality, if you were to try and build this switch panel your self you’d easily be 60$ to 70$ in buying everything separately, I was the first of my group of people to pull the trigger and buy one to test it, and we’ll be buying this for our other project cars for now on

Installed on off road Suzuki Samurai to replace standard keyed ignition switch. Works well so far. One thing to note is the lights are in the end of the metal switch. When the lights are on, and the cover is all the way up the light was so bright it was very annoying to the person behind me at night as it was shining directly on them. Some of that is due to where I have it positioned in the vehicle but to help resolve the issue I put the cover of the switch halfway down blocking the direct light and it was much better. There was some concern that going over bumps would cause the covers to fall down and shut off the switch but so far that has not been an issue.

PROS: solid build quality, good switches, I like the lights on each of them, etc.CONS: Some of the holes they drilled for the switches are not completely aligned, It is metal with carbon fiber wrap/paint/i dunno what it is, not actual carbon fiber. The lack of documentation is so confusing, I had no idea how to wire it and couldn't find out anything on the internet, but for those in the same situation, here are some things I learned after testing things out:DISCLAIMER: I am not a mechanic or wiring expert, I cannot be held liable for any miswirings. This info is here mainly to serve my fellow shoppers as documentation is scarce.the main square on the back of the button is only for the backlight function, you wire power to X1 and ground the X2 port (Use grounds on the 3rd tab on each toggle switch as well or you won't get any lights).The smaller square that screws into the main square is the actual function. It has a simple set of mechanics that connects two contacts together when the button is pressed. So you wire the power into that and then things like your starter and/or other accessories needing only a temporary power on the other end.Apparently, these are rated for 30A, so use that info as to not overload them.I myself wired a relay to the red switch to lower amperage through the combination, I then take the output power, put it into x3 and also connect the 3rd plug's input power to x3, as well as x1 (so 3 wires at this port in total. just carrying power from one port to another). On x4 I've got my starter connected. On the third switch, I have that as a constant feed through (from the X3 port) to give continuous power to my other accessories.Hope this helps!!

No wiring diagram needed. Labels are on the side of the connectors. Took me a second to figure that out. The quality is above what you would expect for how low the price is. Overall, a good product if you're not looking to break the bank but desire a nice aesthetic boost for your simulation rig.

I love this. Looks great in my race car. Works great so far.

The product looked amazing but on closer inspection, I realize that it was incredibly scratched. It was not packaged well at all and just bumped around And scratched everything. What a bummer it would be so beautiful! If the seller is seen this please package work carefully! Also the button doesn’t work.

Backing plate is metal and sturdy. Not sure why it comes with 3 wires and a realy when there are more than 3 switches. Does not have wiring diagrams but is fairly easy if you know what you are doing

Works good it came as described but after a few weeks of use on blue switch stoped lighting up would like to get customer support other than that there is no instructions and I didn’t need a wiring diagram but other might would be nice to have included

Ottimo acquisto

Alucinante

Produkt wie beschrieben

I didn't use it for what it was ment for but it was perfect for what I needed it for very happy

Ich habe 2 bestellt, eins funktioniert ohne Probleme das 2. Haben 2 leds gar nicht funktioniert. Aber ansonsten fühlt es sich hochwertig an