Kreg ACS-TTOP Adaptive Cutting System Project Table Top

Excelente!!

Produit de grande qualité, aucuns dommages apparents lors de la livraison. Livraison très rapide. Je suis très satisfait.

I've been using the adaptive cutting system for about 8 months. I've waited to review the system to ensure I've really been able to put the system through its paces. This is going to be a long review because I want to provide all of my findings. The short review is I love it and I don't really miss my tablesaw. Turning my tablesaw on caused me to experience a lot of anxiety so I decided to take the plunge and sell my tablesaw and buy this. I knew this would always be set up in my shop so the collapsible cart would be a waste for me. More expense and a waste of space below the cart. I bought the table and built a beefy for it to sit on. it houses my shop vac and accessories I use with this system. I'm also able to store my routers and circular saw in it. The dust deputy is housed outside because it would be too tall to fit inside. Dust collection: when hooked up to the system, it does a pretty good job collecting dust but the end of the cut always does it a little extra. I'm wishing in my garage and my wife doesn't want a lot of dust laying everywhere. In the other end of the table is a box fan with a high quality house fan filter to catch the extra dust. Cheap and works great. I don't have a choosing of dust everywhere after using this. I have found this to be extremely accurate in making my cuts. I've been building a lot of shop storage with half inch plywood and this is as accurate as I need it to be. I recently built some drawers using the 1/4, 1/4, 1/4 method. It was time consuming but it worked very well. This is a system that creates 1/4 inch grooves, 1/4 from the bottom of plywood that 1/4 inch plywood bottoms can be inserted into. There are 1/4 dados that run up the front and back of the drawer sides that the drawer front and backs lock into. This system worked quite well to mage those grooves. I did clean up the buttons with my router plane. This works so well that I'm considering selling my compound miter saw. I do need to make a few more miter cuts with this before I decide to do that. I've made a few cuts in oak. I think if you work a lot with 8/4 oak, this would be under-powered for you. It seems to struggle trying to make a full depth cut in 4/4 oak. I find myself sometimes making 2 cuts. I may come back and update this as I finish my shop builds and start working more with hardwoods.

Good quality for what it is intended to do.

My table saw took up too much dedicated room in my shop and wasn't the safest for breaking down sheet goods. I had a Makita track saw for sheet goods and decided to try the ACS. It works! My only hiccup was that I needed to extend my standard Makita track since Kreg is designed for a 62" length track. If I didn't already have the Makita, I would have gone with the Kreg track saw and save the track rework. It is making my work easier. Before I had to put foam board on the floor or another sheet of ply to break a sheet down. It is now simple and also to cut down to smaller sections. I even use it to rip and crosscut solid wood. One thing to keep in mind is that without the folding cart they sell this table is not easy to move with one person. I'm still thinking of getting the stand (probably the best choice) or building a rolling base.