Gelid Solutions GP-Extreme 12W-Thermal Pad 80x40x2.0mm. Excellent Heat Conduction, Ideal Gap Filler. Easy Installation.

This is an excellent product and does what it says. I am running my raspberry pi 3b in the armor case. With stock thermal pads, my pi overheated in around 20 seconds while running the cpuburn test (temp > 85 degrees). Switched to Gelid pads and ran the test continuously for 40 minutes and the max temperature my pi reached was 65 degrees!I bought all the three variants, i.e., 1.5 mm, 2 mm and 3 mm for my future needs, though for raspberry pi 3b with armor case, 1.5 mm and 2 mm are sufficient. It is helpful to sand the thermal contact points of the armor case to remove the black paint it comes with.This pad is better than some of the commonly available thermal pastes, so go for it with eyes closed.

I recently needed to clean my GPU and reapply the thermal pads with thermal paste. After searching for the right materials, I ordered this product, and it turned out to be exactly what I needed. My GPU temperatures have significantly dropped from 90°C to 65°C. I'm really satisfied with the results—thank you!

This thermal pad is giving me very good results. But i wish they provided more quantity for a lesser price. it is just enough for one use . overall good product

I used in graphic card, it maintains the temperature stable and low enough ...At idle status 33C and in gaming maintains below 70C.

Normal temp was 42°c normal, 80°c while gaming, after using this thermal pad, it's 55°c at normal, 89°c whike gaming. Wasted my money, also no refund.

Store: glorious storezPrice: approx 1400 (for both 1mm and 2mm together)I used it in my PS4 alongwith PCM on the die. Works great no issues or loud fan. Please use sharp blade to cut the pad as it is very delicate. I used standard Razer blade.

I have a 5 yr old 1080ti, never opened it and it always ran under 75c.Then I decided I'd clean it and put some new paste + thermal pads just for the sake of it and even though it had a slim (1.0mm) white thermal pad which was worn out on many places, it still worked fine.Then I ordered, 1 of these 1.5mm ones since people had good experiences cooling even 3080FE and boy was I dumbfounded when I applied it. The 1000 series doesn't have memory temperature sensors, or at-least mine doesn't but they are running super hot, probably 80c on idle. Can't even game without GPU overheating and crashing the pc. Temps are reported 60c on idle and that is in ambient room temperature of 20c, in games they quickly rise to 85c. I triple checked the application and even put in more thermal paste the main gpu die, the same paste on the CPU reduced temps by 15c after a decent OC. I ran the GPU to its limit then checked for temperature and it looks like the MOSFETs are the hottest, which I wasn't able to envelop completely with the thermal pad.I wouldn't say this doesn't work, it does but 1.5mm and only 1 of these is a bad idea. Always order 2 and more thickness (+ a little more price, for me it was 2x) is a lot better than a dead GPU.

Best thermal pad you can buy for the money asked. It's also an excellent adhesive for whatever heatsink you want to use. I used this pad to fix a couple of heatsinks on my GPU backplate, does the job perfectly well.