Quickun Industrial Grade Plastic PVC Vinyl Tubing, 1/2" ID x 9/16" OD Clear Tube BPA Free Heavy Duty, 3.3FT

The photo makes it look like it comes to you round like a circle and you just unroll it and go. No...it comes bent. At first you think oh I’ll just unbend it. No...the hose is a very thick plastic that you can’t squeeze with your fingers to get a bend out ....so it literally blocks water from going through the many creases...that’s just water....now add and small sediment and the hose is deemed not usable. Defective hose? Who knows. Even getting it wrapped to go on the box became nearly impossible.

Not as advertised, I'll explain why. If you read the details (which I didn't do because it should be a very straightforward product) you'll notice that it does state there that the wall thickness is 1mm, which is accurate to the product, but this means that the advertised inner and outer diameters mathematically cannot be what they are advertised to be.The problem is that the title states that the inner diameter 5/8" with an outer diameter of 3/4". That means the wall thickness must be 1/8".1/8"= 0.125" = 3.175 mm you'll see in the picture that the wall thickness measured by a digital caliper is 0.045". Not only does this mean that the tubing is less rigid and more prone to kinking, it also means that you cannot use any standard fittings with it.Shame on them for intentionally deceiving people with the title and hiding the contradictory measurements to make someone buy this by mistake just because they know most people aren't going to go through the hassle of returning it once they actually see the product.

This was my third size to purchase for a project, and the only one that kinks with minimal bend. Not sure it's usable, but I cut it so am stuck with it. Very soft material, and was full of kinks in its delivery package. I even tried to work them out, with no luck. No way to know when ordering this way, but I suggest when possible to physically look and feel the intended material. For me, any time I'm saved a trip to Lowe's or H. Depot makes me a winner....also, most of the time they are out of stock.

I can't say this product deviates from 'as advertised', at all. So the fault might be mine - purchasing the wrong item. But the fact of the matter is that the wall of this tubing is so thin that it does not retain a circular shape. In a 10' length, the hose may be collapsed on itself 10 or more times. Passing liquid through it requires considerable pressure since forcing open one 'kink', only leads to another 'kink' just a few inches further in the tube, followed by another and another. Virtually useless for my intended purpose.

As with the other reviewers it came folded and kinked. The hose wall is very thin and flimsy and doesn't release the kinks. This product would definitely collapse under any suction force.I found a much better quality product locally for less.

This hose is packaged with kinks in it, and is also very thin-walled. Do not try to use it with a pump for fluid intake, even a small pump will collapse it and suck it down flat. It performs OK if you use it to pump out, but it is still pretty flimsy. Might be best suited for some sort of craft project or some use that is not for moving any fluids.

Very flimsy hose, kinks easily. Useless to me. The wall could not be made any thinner. Kinks won't come out, and there are many of them along the 10ft length. I'll try a different brand.

This piece was too flimsy and soft to use as I intended. I will find another use for it in the future, but I had to go to a home store to get what I actually needed (which I was trying to avoid when placing my order).