Savior EquipmentGun Pistol Revolver Firearm Handgun Rack Stand, Fit 4-12 of Most Long-Barreled Pistols, Cushioned Foam to Protect, Gun Safe Cabinet Storage Organizer Accessories

This product is an example of how you can take low cost materials and with a good design, make an excellent product. The holder is stout despite being mostly plastic and high density foam. The high density foam provides the needed rigidity that many other designs lack, even metal wire ones. Plastic is used for the dividers, metal brackets on the ends, and metal through-rods provide the proper tension between the pieces. Assembly is straight forwards and easy. Packaging is also well done. Very impressed for the price point.Notching the foam on the barrel side also allows WML to be easily accommodated which many other holders do not account for. Highly recommended.

Easy to assemble, guns fit perfectly, well made and looks good too. I purchased the 8 slot unit and I should have bought the 12 slot. You can't go wrong with this.

I usually read the 1 & 2 star reviews before reading the higher rating reviews and noticed all the complaints with the threaded hardware. I decided to get one anyway because with 4.7 & over 1,300 reviews the issues must have been an anomaly. I wanted a grey one to go with the inside of the safe, but it stated 2-3 weeks out for grey and I needed to get my 80-100+ year old M1911s out of the travel case for their protection, so I got a tan one. Of course today, the gray ones are back with 2 day delivery!?!. It's OK, I also bought a 4 pistol one in grey so I could put the grey ends on this one.The Savior rack with its steel end plates and through length rods make it about the sturdiest rack out there. I'm not going to be lifting it out of the safe and moving it around, but I might use the 4 slot one to put in the range bag so I can transport more pistols in a single range outing.This set arrived complete, and well packed. The hardware all threaded together just fine, NO THREADING ISSUES. The foam panels were the correct thickness and everything lined up just fine. I tightened them finger tight as per the instructions and it's not loose or anything like that.It is not modular - and the listing does not say that they are modular. You can get a 4, 8 or 12 slot rack. If you want, you can get an 8 or 12, slot rack and make or buy some threaded rods from a hardware store and make a shortened rack of 5 to 11 slots, but that's about your only option.I would have liked the slots to be a bit thinner, say about 1.6 inches wide instead of 2.0 inches. That way a 10 slot rack would fit in the same space as this 8 slot rack. I understand that some pistols are wider, but I don't need the extra slot width. All but one of my pistols are M1911 single stack and can fit in a 1.5 inch slot. You can see in the pics how they tilt a bit, but it's fine. I have some under shelf hangers for the extra ones.Overall, with several color choices, sturdy construction with the steel end plates and the HW issues seemingly resolved make this the best quality pistol rack out there.

Definitely worth the money. Simple yet sturdy design. I’ll be buying another. The pictures show what comes in the kit and the finished product. 20 minutes to assemble without hurrying. A couple tips…once you get the first steel end piece & plastic frame piece with all 4 rods through stand the unit on its end and it’s really to just keep alternating pieces until you get to the end. Also do as the instructions indicate and do NOT tighten the end lugs onto the roads when you first start. Mine came with the exact number of pieces and YES, you will need both Allen wrenches at the end. Nice to see an inexpensive rack that’s well built. Sits level on my bench and appears to be solid!

Fantastic product! Looks & feels great! Hold stuff nice and neat, easy to pick up and move around, freed up some room. It was actually pretty easy to assemble with the included instructions, however my only issue with the assembly like several others have mentioned in their reviews came in the quality and assurance check portion of the hardware for the through bolts and the nuts that go on them! So be careful with them when your test fitting everything together! I was quickly able to find two of the nuts that had excessive paint or maybe even cross threaded. Luckily for me I'm an automotive mechanic and running automotive repair facility, So it was very quick to find the thread chaser/repair kit and run a chaser through it to clean it up in short order! Other than that inconvenience which would be far greater for other people that did not have the handy ability of walking out of their office into an area that had the tools one drawer away, I'm very happy and pleased with this product! Anybody that's having similar issues may consider running down to there local mechanic and asking them to run a thread chaser through it real quick! Don't try to force it! It won't work out. Don't forget to tip your Mechanic!

Okay, what can I say? This is sturdy, crazy easy to assemble, and a perfect fit for my safe. The only thing I wish they offered was a rack mount for those safes with back wall mounts (you know, those square peg or circle peg board racks). If I could mount it, my safe dream would come true! As I expand my collection, this will be my go-to option!

This thing is a space saver! The spaces of each compartment slightly wider than another brand I have which is exactly what I was looking for . Also, this has a steel piece that goes on each end that my other rack doesn't have which makes it feel very sturdy

Probably not as sturdy as some other designs but does a better job than most at protecting the firearms, and frankly, that's the most important aspect. Well designed and good use of materials to give some strength. I replaced plastic coated wire holders with this and feel it was a good upgrade.

Pleasantly surprised at the quality. This is a very durable rack that will last a lifetime. It's not cheap or flimsy at all. Here's a tip when assembling the rack. Attach the screws at one end of rod but not all the way tight, just enough to keep them from falling off. That will give you the extra rod length you need to screw the other ends. You may have to compact it a little bit. I tightened them all the way on one end and came up a bit short, then I loosened the screws to give me a the extra length. Once you have screws on both ends, you can tighten it up. Very pleased with this purchase. I think it's one of the best options out there and fits perfectly in my gun safe. For Canadians that are concerned about compatibility with trigger locks, check with your CFO. My understanding is it all depends on your storage location. If stored in a gun safe designed for storing guns, trigger locks are not required. Trigger locks would likely not fit, however, you could easily customize the slot size by removing a divider to accommodate a trigger lock.

Easy to assembled.But if you live in Canada do not buy this product. It doesn’t work with trigger lock.