CAR-REP® 2K Epoxy Primer with Wise 2K Technology, Suitable for All Kinds of Metals, Carbon Fiber Substrates, Most Automotive Plastics, Black, 11oz Aerosol Can

Have not had any issues, sprays fine.

Good

I bought some used steel rims for my truck. I had the tires mounted and balanced, and then decided to repaint them because they looked horrible. Someone told me about epoxy primers and I found this product. It went on super easy and quick, it took me 2 days to do the inside and outside of all 4 rims, that time includes sanding, taping, spraying with prime, curing and then 3 coats of paint. I have had the truck through fields, gravel roads and early season snow and salt. So far the paint looks brand new after about 2 months. Product is a bit pricey, but worth it.

I don't know if it's a design or manufacturing issue. The nozzle stem inside the can was clogged and would not dispense the product. The can itself was unused and in good condition. The spray nozzle itself was clear. The can was full and had propellant. I needed to complete a repair of a windshield pinch weld, so I placed a rag over the can, punctured it to release the propellant, and mixed the product in a plastic container. Wound up brushing the epoxy mix onto the pinch weld. It worked for what I needed to do, but was a royal pia, as I had already masked off the vehicle as I was expecting to spray the epoxy paint as designed. Other reviewers have had success, but be aware you may not be so lucky to have a functional spray can.

Great price, lays down nicely. Most of all you shelf life, when you don't use the whole can, can be used for other projects at different times

I really like this product for convenience and coverage. I have purchased it several time for individual car parts or small areas of a car body for repairs, and it seems to create a good, tough coat. On the down side, the product is relatively expensive and in use has two drawbacks that are worth noting: 1) if you're spraying something in bursts, where you're on and off the nozzle, the can tends to throw/dribble some random thick drops on the surface (this could be operator error, but I've not typically had this problem with other aerosol spray products while it happens pretty consistently with this one) and 2) the output can become inconsistent (the product doesn't spray out consistently and in the same amount) as you get down to the last 1/3 to 1/4 of the can. That said, this product performs better than some more expensive similar products that I've tried, and I'm generally quite satisfied with it.

Does not dry sand.No problem with the spray out. Let it cure for 2 days, attempted to dry sand and within 10 seconds the sandpaper was slogged and the epoxy was extensively scratched. Sandpaper was quality 3m paper. Don't recommend this primer unless you want to wet sand and even then it doesn't sand very well. i'll stick with SPI products.

Have used before, perfect for smaller projects. The cans I purchased sprayed out perfect, when they started to spit, they were empty. I think the chemistry that goes into this is amazing, A 2k epoxy primer in a spray can that doesn't have a pot life, who would have thought!

I bought two at the same time and then another can a month later. In comparison the first two dispensed way slower and smaller spray pattern than the later purchased one. I wish all of them performed like the later purchased. It applied so much nicer, faster, seemingly better single pass coverage and also seemed more…. Aerosol’ed like it was charged up more. All in all happy with the result so far on my cars interior. Did seem like the coverage was slightly weak. Had to do three coats over everything. First coat was very see through

Devo dare 1 stella perche non so se sono capitate a me o meno.. ne ho pressi addirittura 2 vernici... tutte 2 sembravano tappate.. non spruzzavano bene.. provato a cambiare ugelli senza successo. Per fare il reso casino perche essendo vernice devi pure pagare.

First of all I shook the can for six minutes to make sure it was mixed .Tried to do a spray test nothing not even a drop. Took the nozzle off cleaned it, nothing. Tried to depress the spout without the nozzle again nothing.Took my air nozzle and blew some air into the top of the can finally got it unblocked..While spraying it never came out in an even pattern. Spitting and some big globs.The spray pattern is a flat line, good for flat surface but not so good when trying to get into the nooks and crannies of rims. Lesson learned don’t see myself buying this product again. Need to top coat it, will let you know how that goes.I also experienced the same as Archie, when trying to sand for top coat. It peeled off and was soft after sitting over night.

The can is still full but won’t spray the first one was fine but the second on my last order of this product will not spray

I'm no paint expert, but it seemed to have worked okay. Did not test its hardness.