AdviaceGrill Parts Kit Compatible with Nexgrill 720-0864M 720-0864 720-0830H Grills, 2 PCS Grill Flame Tamers & Igniters and Burners Replacement for Nexgrill Evolution 720-0864M, Nexgrill 720-0864

It was a very easy install. Tips to make it easier for your do it yourselfer’s.1) have a pair of needle nose pliers to pull out the cotter pin on the old burners, if your careful you can re-use them. If not buy some at the local hardware store.2) have a pair of wire cutters to snip the ignition wire for each burner. It makes it easy to take out especially since your igniter screws will be rusted to the old burner.3) once you install the burners, igniters, and wires use some small zip ties to tidy up the excess wire. They do come with longer than expected wire, but you can make it tidy.4) if you have trouble lighting the burners, make sure the spark is lined up to hit the gas hole out of the burner. Note it will take some time for the gas to flow, be patient and don’t set yourself on fire. Over time the gas will eventually flow easier and light much quicker.5) replace the AA battery in the igniter button. Simply unscrew the push button, and put a new battery in.6) if you want to make it brand new, get new grates and grease drip pan. I didn’t, but I keep my pretty clean. Stove cleaner works great on the stainless steel to keep everything looking nice and fresh.For $40 the replacement parts are well worth the cost compared to a new BBQ.

I don't much care to write reviews, but this product is awesome, I have a nexgrill 5 burner grill, I have used cheaper burnersfrom Amazon before these and they were garbage, these have great flow, grill gets to 800 degrees if I want(I have an adjustable regulator) I had to drill holes to make them work for my grill but i am super glad that I did, amazing!

My husband was thrilled this kit had everything he needed to revamp our bbq. It saved us hundreds of $ on a new bbq. Easy to install too. Just keep your bbq and replace the parts.

Update 2/12/24Well, I've had this item, which I mentioned below, is the second time I've purchased it. The igniters did not work. They continually shorted out. After hours of trial and error, I finally just replaced the igniter itself. Still shorts out. I've yet to find a way to plug the igniter ports, to track down which wire or wires are shorting out. Unfortunately, I did not save the old ignition wires, so I have nothing to compare. At this point, the only thing left is to buy new wires. I've considered installing new shrink insulation around the ends, but that won't help if there's a short in one or more of the wires. I'm fairly certain at this point, since when all the wires are attached to the new igniter, they don't cross short at the igniter. I hear it shorting out under the control panel.The manufacturer/vendor must have switched out the original wires for something cheaper from a different supplier, because these are definitely a problem, and I (apparently) am not the only customer having this problem. The time and frustration this has caused me is NO WHERE NEAR worth the $35 I paid for this kit. ** DO NOT BUY ** Save yourself the trouble.Original October 2023I purchased this product a little over two years ago. It fit my unit, and worked well. No complaints there. My second purchase should server as a pretty good product endorsement, but this item has some significant faults, too.The venturi tubes seemed to rot out very, very quickly. Within the first year, maybe a bit longer, the middle tubes were flaming high and yellow, indicating a tube leak or break. It's been getting progressively worse since, though I've just been putting off cleaning and rebuilding the grill again. When I did pull the gril apart today, I found that the baffles are in pretty good shape, doing much better than I expected. There was some corrosion, but I'm guessing that they'd last another year if I didn't have the new, shiny replacements. The ignitors have never been a problem, just keep the batteries fresh, and it starts first click, every burner, every time. But again, the venturi tubes where the problem. The two middle, most used, venturi tubes, had not only rotted out, i.e. large, horizontal "slashes" where the distribution holes used to be, but also broke in two. The propane was simply venting thru the end of both pipes (perfect, for burning meat to a crisp, if ya like that sort of thing; just use the back of the middle burners, but the front of those burners, were pretty much good as bun warmers only.).Product value was good for the price, and this time (third time) is likely the last time I'll rebuild this unit. The parts from this kit do make it operate like new. However, those venturi tubes should last 4 to 5 years (as OEM venturi's do). They are just way too thin, or the materials are somehow inferior, not sure which. They shouldn't degrade so quickly, or so badly.Next time doing this process, I'd definitely try to find a better venturi tube supplier.

It was time to rebuild the internal structure of my NexGrill. These fit perfectly and seem to be of good quality. The set is reasonably priced

Perfect fit for my grill. Replaced the shields, burners and ignition probs. Works like new.

Replaced all my burners and plates. Works perfectly. Wish the ignition wires were adjustable. But, nothing a couple of small zip ties can’t fix. My grill works perfectly now. Nice and even fire.

Grill parts fit perfectly and arrived quickly. Best price found.

Longueur des fils pour allumage pas assez long