Automatic Watch Winder with 2 Quiet Running Motor Watch Winding LCD Display+ 3 Storage Box, Built-in Illumination, Walnut Watch Winder for Rolex with 4 Adjustable Upgraded Watch Pillows, AC Adapter

Had a winder from a different brand that died after a few years, my collection has grown since and was looking for a winder with individual settings for each watch. This winder checks all the boxes, looks great, practically silent, you can set each watch rotation individually and have room for additional watches on top. Lighting could be better, but I keep it off since it is in my bedroom.

I purchased this winder for two of my automatic watches that struggle to wind with my inclined winder. In unpacking, it is packed very secure, with a lot of padding. The material appears high quality and from my initial inspection, it does appear to be real wood.That being said, the unit did arrive broken. The bezel on the right winder had fallen out and the actual mechanism had fully dislodged from the box. I have returned for a replacement, the the new replacement arrived very quickly.Overall, it is a high quality winder. I had thought that the large pads would be the correct size for my watches, but it turns out that the smaller pads work perfectly. I'm 6'2" and have normal sized wrists.Some features on the box. You do need to open the front in order to unlatch the top. The display panel light turns on when you open the box as well and the winder stops. The two winders are asynchronous, so the watches will generally be at different orientations and possibly winding at different times throughout the day. The pillows for the top of the static watches are basic foam rubber, but do the trick.

Unit was tightly packed, didn’t expect to open it up and see the internal parts a mess. Outside appearance was beautiful, I was so excited and pleased until I opened it up and parts scattered.Promptly started the return process and Amazon was on it.I don’t think it’s the manufactures fault per se, as the shipping box looks as though it may have been dropped but little damage was present on the box so who knows.All I know is I am anxious to get the replacement and get it set up as it was gorgeous and I will show it off once it’s set up!

I have been using this for about 2 weeks. So far I am very pleased with the operation and quality of the unit. The motors are very quiet and the noise level is discernible when door is closed. The unit arrived and was packed very well to avoid damage. The first one I received had a scratch on the stainless frame around the door. Customer service was great. They replaced it quickly. New one is flawless. The walnut cabinet is vey nice. Looks like a much more expensive unit. Currently using to store my Rolex, Longines and Christopher Ward watches. Unit is performing as expected. I definitely recommend based on first impressions and first few weeks of use.

This box is a looker. Seems to be quality built and does the job. I like the way that the watch pillows hold the watch and inserts into the case. With the included small pillow, my wife's watch fits easily. Some nit picks: the glass is recessed, which looks nice but makes it hard to keep dust and dirt off of the top. The motors are a little louder than I had hoped. Not real bothersome but not exactly silent. Since the motor turn options are set to run in 12 hour cycles, it can be set not to run at night which is nice. This is still quite new so we will have to wait and see about the durability but so far I would say it's a keeper.

First of all, the quality of this winder is very good for the price. It looks great and feels great. This made returning the winder so frustrating. For context, while I don't have a ton of watches and don't know everything about automatics, I do consider my self knowledgeable and a bit of a watch nut. That being said, there were two main issues with this winder.The first issue is that my wrists are small. I size my watches to be about 6.1-6.2”. I was looking forward to this winder as it advertised that it caters to small wrists. It both does and doesn’t. The 6 winder model came with 6 medium pillows (installed), 2 large pillows, and 2 small pillows. My watches would only fit on the small pillows. If I opened the clasp on my watches I could latch them over the medium pillows. This was the recommended action in the manual. However… while the pillows are soft there is a very strong plastic piece under the fabric. While I have never worried about stretching or damaging a watch band, my watches were stretch so tight that there is no way I would risk damaging the braclet on a Rolex or an Omega because the company can’t include a 1-for-1 swap for each pillow at each size. Additionally, I do have some quartz watches that I was planning on storing at the top of the unit. The watches fit great horizontally on the pillows but there is not enough space between each adjacent pillow for the straps. Basically, if I have a watch horizontally on the first pillow and try to place a watch horizontally on the second pillow, the braclets will hit each other and literally not fit because there isn’t enough space between them. This is especially frustrating because there is easily enough room for the designer to space them further apart.The second issue was something that another reviewer noted. This is the real deal breaker. The manual has a table inside that lists the amount of time it rotates and the amount if time it doesn’t. For example, 650TPD would turn for 1 minute straight and the rest for a few minutes. This would go on for 12 hours where the watch would then sit and rest for 12 hours as an anti-overwind feature. I was able to count the amount of times the watch would rotate in each 1 minute period. After doing some simple math, I found that in every single TPD setting, the winder’s actual TPD would be about 100 TPD lower then advertised. For those who are wondering why this is a problem… I had a cheep winder that does something similar. A watch that normally runs +8s/day or 56s/week would loose about 1-2minutes a week on the winders highest TPD setting. It is impossible to get in enough TPDs to keep the watch properly wound. The manual for this winder recommends leaving your TPDs at 1000. My guess this is because they know that if your watch’s recommended TPD is 650, you will never be able to wind it, and you will be forced to go to a higher setting.I’m disappointed that these flaws exist. I was really hoping to avoid getting something more expensive like a Wolf or Barrington but, it appears impossible to find an alternative winder that can do the job.

Contrary to another popular review, I had no issues finding the same color "small" size cushions for the watch winder on amazon. They were actually delivered before the watch winder. So far this has been working perfectly and is keeping my watches wound and working. I haven't measured whether it is actually spinning 650 or 750, etc. times per day but so far my watches haven't stopped since they've been in there and they are keeping good time (a few seikos, hamilton, tissot).It also looks great. It's a real eye-catcher and I know people will ask about it when they see it. Build quality seems to be top notch. Happy customer so far.