GOOFIT Auto Electric Choke Replacement for Helix CN250 Elite CH250 Baja BR250 DN250 250 ATV Scooter

Used this on my 2006 Helix, so far so good. Helix had a hard time starting before. It start right up now after installing this.

Works as designed

I wanted to bypass the electric choke. But I had a hard time finding the right kit. I went with this to replace the choke on my arctic cat 90cc. Unfortunately the connector was not the same. I cut the old one off and switched them.Works great again

This was not the exact replacement for my 2007 Buddy 125 but I was able to make it work.The groove for the retaining clip/semi-ring wasn't thick enough to accomodate the clip so I made it wider wtih a pair of forcips. Then I needed to squeeze the clip a little closer together for a snug fit.Lastly, I needed to bend the screw hole area (tab) of the metal lip so the rest of the clip put more downward pressure on the choke. After all that it works perfectly and saved me a good bit of $$.

Got this for my 1986 Honda Helix. It had a hard time starting so I replaced it with this electronic choke and now it starts right up and idles well from the start.

Worked as good as new.

Works well with my gy6 moped, as a replacement.

Product picture does not match the part, did not fit 2013 50cc GY6 ZNEN scooter. Replacement part with slightly larger than original stock part.

I used this for a Yamaha generator 7200

Habe ihn für meinen YY250t gekauft. Passt Perfekt, inkl. Anschlusskabel für Temperaturanzeige. Perfekt 👌

No sé lo efectiva que es está pieza para el arranque.pero me están dando problemas siempre.Al principio mas o menos bien mas adelante deja de arrancar la moto bien.

Perfect

Je change mon commentaire starter de mauvaise qualitéAcheter en février HS en décembre j'ai du faire environ 1500 kilometreJe recommande pas