معلومات عنا
دعم العملاء
احصل على التطبيق
قم بتوجيه الكاميرا لتنزيل التطبيق
حقوق الطبع والنشر © 2024 Desertcart Holdings Limited
🔌 Power Your Projects with Ease!
The 12PCS 18650 Battery Holder Bundle is designed for DIY enthusiasts and professionals alike, offering a versatile solution for powering various electronic devices. With options for 1 to 4 batteries, stainless steel springs for secure placement, and pre-installed wires for easy soldering, this bundle is perfect for anyone looking to enhance their projects with reliable power.
A**R
Bargain battery holders
While light GA wire, these worked perfect for my projects that make use of recycled laptop batteries. I only pull 1 amp current and the wiring is fine for that.
D**N
good size
They fit the button head cells.
D**N
26awg aluminum wire that pulls out easily
For comparison I placed a 24awg copper telephone cross connect wire next to it in the picture. Max current is probably around 0.5amps. I used the single battery clip and need 1amp. The red anode wire fell out with just the slightest tug, plan on soldering them if you keep them. I would change out the wires on the 2, 3, or 4 battery pack to something larger. The battery clips in way too snug, great if you are using them for some type of rough handling, but you need a screwdriver to carefully remove it.
A**R
Cheap and they do what they say on the tin.
All the holders are in series with none of them in parallel. Voltages would be in the 3.7v, 7.4v, 11.1v and 14.8v range with 1, 2, 3 and 4 cells respectively. The cells are very hard to get out of the holders, spicificly the single cell holders. This might be a benefit or a draw back. The wires and then and cheap feeling and are not soldered but crimped in place. Dirt cheap, for the price what more could you ask?
T**.
Bundle has a little of everything.
Purchased for the 4s holder. Due to some of the other reviews stating that the included wiring wasn't sufficient enough, I attempted to soldering thicker wire to the brass brads. It worked, but be careful with how much pressure you apply to the brad. The black plastic housing was very soft when the solder finally turned shiny.I used some repurposed, Samsung flat-top 18650 batteries for this project and they fit great in the holder. Tight enough to keep from falling out, but easy to pry them out.
T**E
Nice battery holder
The media could not be loaded. Nice set of battery holders for DIY projects works perfectly for the 18650 batteries
J**R
Batteries fit good
Great assortment of different battery sizes should help everyone
J**D
Why
Started falling apart on me right out of the box. Very poor quality.
ترست بايلوت
منذ أسبوع
منذ يوم واحد