eXtremeRate 8 in 1 Red Metal Magnetic Thumbsticks Analog Joysticks for Xbox One, Xbox One Elite, Xbox One S, Xbox Series X, PS4 Slim, PS4 Pro, PS4 Controller with T8H Cross Screwdrivers

I really hope this company stays around for a long time. Such a good idea and they ACTUALLY give you the product. They give you what you would expect. It’s not some crappy material and bad measurements. It’s like it came from Sony or Xbox. Amazing company. Will keep buying from them for as long as they are open.

Works great with the Xbox One Series X/S controller.

This applies to XBox One ONLY: These thumb sticks were easy to install. They work flawlessly - almost (hence 4 instead of 5 stars). The issue I ran into is that in Destiny and Destiny 2 the left trigger behaved as if activated, meaning that I was constantly aiming down the barrel of my gun. After I moved the left trigger magnet by approx 5 mm, the left trigger behaved normally. Soooo... not sure why only those two games. There may be others similarly affected that I don't have but it CAN BE OVERCOME.

These do indeed fit on the PS5 Controller/DualSense. You have to install them, push down on the thumbsticks, re-assemble the controller, and really push down on them to set them in place. They do fit. Not all controllers are the same! So you may have to be careful when pressing down on them because you don't want to damage the thumbstick modules! But they 100% do fit. There is a catch, the feeling of metal grinding against plastic during normal use. Over time the metal will shave off the plastic and it will stop. They are not a perfect fit, it seems like none of the interchangable options are a perfect fit though. You could also try sanding down the inside magnet aswell to get it to set properly.And yes, XBOX kontrol freaks fit on the concave ones, the domed ones do not fit well, but you can force them on. The domed ones have no grip! None! The concave ones are very grippy. But these are xbox thumbsticks through and through. You can make it fit on the ps5 / dual sense controller though.

I bought this on a whim for my Switch Pro Controller while looking for a replacement part for my Joycons, with the idea that I could make it slightly more premium (I had wanted to use the Astro C40 TR with the Switch, but alas, it isn't compatible). The end result is... neat, on paper, but I expect to be neither more competitive nor more comfortable while playing games.Opening the controller is surprisingly easy. Despite there being twelve screws (two holding the controller grips, four holding the battery cover in place, and six holding the two halves of the controller together), they came out easily and it's not necessary to remove any ribbon cables unless you want to. Just open the controller like a book, pop the old analog sticks off, then place the new ones. Reverse the steps; easy peasy. The problem is the little issues that crop up to complicate this install.A previous reviewer recommended filing down the prongs on the rockers (the box things that you place the replacement sticks onto), which I did. I can't imagine not doing that and having these work, as even after filing those down these replacements barely operate without coming into contact with the front half of the controller. I had to go in once or twice to file some more, then leave the screws holding the controller together a little loose. That alone should be a dealbreaker, but as long as the controller doesn't creak or feel loose, I'm fine with it. Once the screws are tight, give them a full rotation counter-clockwise to resolve the sticking.But now that it's all done... eh. It's neat, to be sure, but it's not exactly game-changing. The metal sticks are glossy and make a pleasant noise when they hit the edge of their movement range, and the silicone texturing is acceptable. The excess is not precisely cut away so a small portion of it is left on some of the sticks, but it's hardly a big deal.Being able to swap out sticks on the fly with magnetic locking sounds amazing, but the included sticks aren't dramatically different. The standards are comfortable, and the double talls are exactly the same, but double the height. They're a bit awkward for my thumbs, but they could be handy for someone more acclimated. I don't see how the convex sticks are anything more than a novelty though-- the shape, combined with their silky smooth texture, means your thumbs would get better traction holding onto a stick of butter.So there you go. Some shiny analog sticks that are tedious to install comfortably and provide little benefit unless you'd like to adjust the height of them with regularity. That might appeal to you, in which case this is perfect! But for me, it's more of a parlor trick and a way to differentiate my controller from a sea of controllers when I visit friends.

These are awesome. The ability to magnetically switch out between the different sticks when I switch games that use the sticks differently is great! I find myself using them in 2 configurations and switching between the 2 mostly, but I really like them. They are also metal, heavy and well built. Installation is very easy if you are technically inclined, and somewhat easy with youtube videos if you don't know what you are doing. Highly recommended!

Product is complete garage. They fit ps4 controller just fine however the surface your thumb contacts is small than the original ps4 control and there is no texture to the thumb sticks, they are very smooth. DONT WASTE YOUR $

Installed these along with a eXtremeRate Cyber Plague Touchpad Front Housing Shell and Rise 4 kit. Feels solid. Works well. Quality product.

The material for the thumbstick grips wasn't cut perfectly on mine, and they came covered in dents and smudges, not a big deal but I really expect to be receiving someone's returned unit, which I'm guessing was due to the build quality issues on this one. Other than that it's fineupdate: its not "really" compatible with the sn30 pro unless heavy sanding is done, and i mean heavy sanding. Otherwise it'll pop the analog sticks out weird and they'll stick and the back plate won't stay on right. Its fine for switch pro controllers and xbox controllers, but to the person who answered my question about them working with the sn30 pro, NO, THEYRE NOT COMPATIBLE

Bestellgrund:Defekt an der Kappe des Analog-Sticks von meinem XBOX-Elite-Controller. Nach meiner Recherche gibt es keine Ersatzkappen und es müssen immer die kompletten Analog-Sticks ersetzt werden. Auch konnte ich keinen Anbieter finden der die Original-Sticks versorgt.Lieferumfang und Produkteindruck:Wie auf den Bildern dargestellt werden 2x kleine, 2x mittlere und 2x große Analogsticks inkl. zweier Schraubendreher geliefert. Die Lieferung erfolgte sehr schnell (1-2 Tage). Optisch war zunächst kein größerer Unterschied erkennbar, mit Ausnahme bei den kleinen und großen Sticks, bei welchen die Vertiefung in der Mitte optisch tiefer wirkt als bei den Originalen. Spürbar besteht in der Tiefe jedoch kein Unterschied.Montage:Für meinen Fall und den Ersatz bei einem XBOX-Elite-Controller war kein Einsatz der Schraubendreher erforderlich. Da die Sticks magnetisch sind, werden die alten einfach abgezogen und die neuen entsprechend einfach drauf gesteckt.Fazit und Kaufempfehlung:Nach ausgiebigem Test, entsprechen die Sticks von der Form und den Abmaßen her 1:1 den Originalen. Es gibt keinerlei Blockaden der Sticks durch zu hohe Magnetkraft oder sonstiges. Weder beim drücken der Sticks, noch bei der Bewegung. Auch ist weder eine stärkere oder schwächere magnetische Anziehung der Sticks spürbar (nach meinem Empfinden).Allerdings ist eine andere Haptik der Stickkappen spürbar!!!Während die Originalen weicher und gummiartiger waren, sind die Ersatzsticks aus hartem Kunststoff.Mit der alten gummiartigeren Oberfläche lies sich der Stick mit dem Daumen etwas leichter mitziehen. Auch war die Antirutsch-Struktur an der Seite etwas weicher, wenn der Druck des Daumens am Bewegungslimit des Sticks größer wurde und der Daumen aufgrund dessen nicht mehr mittig aufliegt. Aufgrund des härteren Kunststoffs an den neuen Sticks, ist minimal und sehr fein gefühlt, etwas mehr Druck erforderlich, um den Stick "mitzunehmen". Die Antirutsch-Struktur an der Seite ist entsprechend härter aber auch rutschfester. Vermutlich werden die Ersatzsticks somit aber auch nicht wie die gummierten Sticks an der Kappe kaputt gehen. Somit haben beide Varianten Ihre Vor- und Nachteile. Im Endergebnis scheint dies sowieso die einzige Variante zu sein, mit welcher Ihr euren Controller noch weiter benutzen könnt. Und ich habe mich mehr an die neue Haptik gewöhnt, als die nächstgrößere Variante der Originalsticks zu nutzen. Somit von mir eine klare Kaufempfehlung.

Mi sono trovato molto bene. Inizialmente avevo dei dubbi sulla compatibilità con il pad ps4. Mi sono dovuto ricredere, si adattano perfettamente, sono molto compatti e solidi.

Muy fácil de instalar y muy bonitos, el precio es algo elevador, pero vale la pena

better then the compiting brand !! all the joystick magnet are solid ! great buy :)