Foampro219 Foam Paint Roller, 9" x 1/8"

Worked great with solvent based concrete floor sealer

I buy these and cut them in half for a four inch roller. I use these exclusively for rolling epoxy and fiberglass. They don’t want to leave bubbles.

worked well used for two park epoxy and lasted thu. the job witch was 2 sheets rough ply no falling apart, wish they made 3/8" thick. happy.

I work on model aircraft, not full scale boats and aircraft. I don’t need a full sized laminating resin roller. These little ones are perfect and work great. They hold just enough resin to help wet out your layup, don’t stick, and don’t leave any bits behind.I had been cutting down West System rollers. I haven’t done the math, but these are very convenient and I would buy them again.

Good finish with epoxy, but comes apart during medium/large projects.

This was the secret weapon for tipping and rolling Total Boat Wet Edge paint. The foam is frightfully thin, but that was the secret for getting a thin enough coat that it flowed out nicely. I went through several iterations of nap and foam rollers before I switched these on the final two coats. They were a lifesaver.

I tried to use these for epoxy paint on the bottom of my boat. They were horrible, shedding foam and coming apart almost immediately.

These things are way better than the rollers you get at the big box stores.

I bought 2 rollers but only needed 1 of the rollers to paint 19 feet of 62" canvas front and back with gesso for a total of 4 coats. I was able to wash out this roller over 10 times and it stayed intact. At first I thought it was too thin because I have to reload frequently, but it applied thin flawless coats. 5 stars!!! Very happy with this item!

No lint to pick out of my paint and a nice smooth finish. Very satisfied

Plus mince à quoi je m'attendais.Produit sinon ok.

Great for any type of paint. Very washable.

Loved these rollers