The two terminals/posts are not labeled. Can either wire lead be attached to either post?

correct , single microfarad caps are not labeled , there is no polarity

This is listed as a replacement for the 97F5476 but that has three posts and this has two. Will it still work?

The 97F5476 seems to be a dual section capacitor with a 5uf section and a 20 uf section. This Amazon part would only replace the 5uf section. Maybe that is the portion defective in your system and it would work if you left the 20uf section of the old cap connected. If both sections are bad but the dual section caps are too pricey for you; you COULD buy a 20uf capactor AND a 5uf Capacitor, then tie one terminal of each together for the common connection and that combo would replace the 97F5476 (assuming that the two caps are rated at a similar AC voltage as the original) Also you will need to find a spot nearby to mount the second cap. If this were MY system, unless the dual capacitors were really cheep and available, I would replace my dual cap with two separate ones. That way, if they ever needed replacing in the future, the parts would be more available.

Genteq

التفاصيل

الوصف

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة