Next Level Racing Wheel Stand 2.0 | Adjustable Foldable Racing Wheel Stand | Compatible with Logitech G29 G923 Thrustmaster Fanatec | Shifter & Handbrake Support

I bought this item as I am getting more into racing sims. Nothing is worse than trying to keep up a competitive pace only to have the pedal box move out of alignment, or the clamps holding the wheel not being quite as secure as you might like. Being completely honest this one was more expensive than I ideally wanted to spend, but having the ability to lock my office chair into the frame using the front casters sealed the deal.First off I will say, this is a HEAVY unit, rock solid construction but not something that is all that easy to move. It is not impossible by any means but smaller folks may need help. I will be moving mine quite regularly from a deployed position in front of my PC to folded away against the wall. Not a reason not to buy, but something to be aware of.The packaging was good with a comprehensive set of instructions to build the unit. If buying, take the time to check, check and check again that you are assembling everything the right way around, the plate that the pedal box mounts to in particular. The unit comes partially assembled and you get all the bolts, allan keys etc that you need to do so. I took the time to attach the wheel and pedals to their respective mounting plates so that I could get a better feel for the height of the wheel, angle of the pedals etc. This isn't something referenced in the instruction booklet but I would recommend it.OK so enough of the pre-amble Snowy, you are saying I am sure, what about using it? With the unit set up and F1 2023 running on my gaming PC, I gave the new setup a try.If you use a pedal-box on the floor, you will know about movement there no matter how good the carpet grips may be., especially using more modern pedal boxes with higher resistance on the brakes. What I hadn't appreciated though is how much I had held back from aggressive steering inputs with the wheel clamped onto my desk. With my wheel and pedals (Logitech G920) bolted physically to the frame, there is absolutely zero movement.Mounted to the stand, the wheel and pedals now feel like the are attached to the body of a car, there is no flex, no movement at all that you can apply that will cause any kind of movement to the frame. This lets you stomp on the brakes, wrench the wheel to catch a slide, and everything just stays true and solid. I don't have space for a full cockpit setup (seat etc) but if I want to expand the setup down the ways, the Next Level Racing kit will allow me to do so without having to buy a whole new unit. Equally it provides me with the perfect mid-point that matches my needs and available space - I have a much better sim racing rig now with the added bonus of being able to fold it and move it aside when not in use.Very happy customer, would recommend Next Level Racing products based on this experience. Well made, well engineered, good instructions for the assembly and well packaged.

I'm a 51 year old GP who has enjoyed sim-racing since the original GT on the original PS. I've always had a wheel of some sort to play them, but generally something cost effective as I was a student, and they kept breaking. So I used a Logitech GT Force, and the G25, always on a stand I hacked together from an old desk my GF (now wife) had.IT did the job, but had lots of flex and looked like crap.So, the next level wheel stand? Absolutely fantastic. Initially had it set up with the G25 and it improved the force feedback immeasurably.Then I put a Logitech G Pro Racing Wheel on it, and boy I'm in heaven. Pop the Occulus 3 on, and I can drive stupidly fast on several of the most famous circuits on the planet.It's pretty easy to build, a little fiddly to know how to angle the various plates that need to be angled, and I would suggest you have a good look at your wheel and pedals before hand and decide the best orientation in advance.It's plenty solid enough, I'm using a pretty heavy load-cell break and it only very occasionally moves under pressure when I'm really over-doing it.The gear shifter/handbrake table is a bit rubbish sadly. It's functional enough but you get very few positions you can put it in, and it's uncharacteristically wobbly compared to the rest of the unit.There have been complaints of heaviness. I'm of average build, maybe 70kg, and have no issue moving it from storage position to sofa position, about 2m.I haven't tried folding it away, looks like it would do this quite well but I've got the room not to need to do it fortunately.ABS haptic module on my list for Santa.

Absolute solid piece of kit, easy to assemble. NLR do have an instruction video on YouTube which is useful if you can't be bothered to read the instruction manual.Mounted Logitech G923 trueforce no problem, holes in the right places for bolting.Logitech is going back and mounted my Fanatec CSL DD PRO , again straightforward and everything fits.My one issue is the gear shifter arm, this bolts to the left or right down arm but only fits the top down arm that slides up and down in the lower arm, I found that the wheel plate was a tad too high due to not being able to bolt it lower down the down arm, hope that makes sense. Means my arms are holding the steering wheel just a little bit higher than would like but its not a deal breaker.Build quality is great and has the option of adding the seat add-on if you fancy. Bit pricey but you get what you pay for.Happy racing!**UPDATE** Fitted the pc chair wheel tray today and found I was sat way too close to the wheel. Bought some metal bars with holes and extended the tray by approx 12 inches, now able to use pc chair in the wheel deck no problem. No movement whatsoever when heavy braking.Whoever tested this at NLR must've been 6 stone and skinny as a rake.Anyway, problem solved.

very stable, straightforward to assemble, as other reviewers have said it is not light but it is well made, easy to attach my logitech g923 wheel and pedals to although i did use youtube as a guide because i lack any mechanical empathy! this is a good product

Quality item and very sturdy. Easy to assemble and plenty of mounting options.I was previously using a Fanatec CSL DD via a desk mount and although I thought my desk was pretty sturdy, it was nothing compared to using the wheel via this NLR Wheelstand. There is no sooo much more detail and nuance in the FFB and I find myself catching slides and spins much more easily than I did previously.Having a solid deck for the pedals is also much better and provides much better feeling that you are connected.Via the desk mount I also found FFB would generate noise (creaks from the fanatec desk clamp and also my desk) as well as jiggling my desk and monitor. Now the Wheelstand is no longer connected to desk and therefore monitor, everything feels more stable and quiet when racing.It's also very handy having one unit that all the gear is mounted to in terms of getting ready to race. Previously it took upto 10min to get everything out and connected and in position ready to race. Now setup is a breeze and makes it more likely I'll do some racing.Can't recommend highly enough and it's made much more of an upgrade than I was expecting. Also really good value given the quality I would say.

Other than going for a full on rig this is by far the best wheel stand!I've been using this for around a year now with a csl dd and pedals. I probably use this on average around 15-20 hours per week.There is no play what so ever in the stand and is extremely rigid. Materials used are very strong and robust. It offers plenty of mounting options for wheels and has a gear and handbrake attachment (not used those)It also has a wheel plate to prevent your chair moving backwards which works a treat.Plenty of height adjustability, wheel plate and pedal plate.

I ordered this item as new, not used. However, when it arrived, the packaging was clearly damaged and had been resealed with new tape. After opening the box, it was obvious that the product had already been used.Several parts had visible scratches, while some were only noticeable under bright lighting. The screws and accessories had already been opened and were thrown together loosely in the box. It also looked like the previous owner had disassembled the unit incorrectly, which didn’t match the instructions in the manual. As a result, I ran into a few minor difficulties during assembly.That said, the wheel stand itself is very solid and sturdy. The only real downside is its weight, although I was already aware of that before purchasing. If you’re assembling a brand-new unit, the installation process is actually quite straightforward.I’m using a Moza R12v2 with SRP2 pedals. The wheel base mounts very securely and feels extremely stable. However, if you’re using the SR-P2 pedals, be aware that the mounting holes don’t line up perfectly. I was only able to install three screws, but fortunately the pedals still feel secure and stable during use.I contacted Amazon customer service and received a partial refund, which I accepted because I didn’t want to go through the hassle of returning such a heavy item and waiting for a replacement. Nevertheless, I’m disappointed by the seller’s quality control and honesty. A used product should never be sold as new.

The first thing to know is - it's very heavy. Too heavy to be lugging about. I fitted two small castors to the front, all you need is a pair of small castors with an 8mm tread that will screw into the frame. The threaded holes are already in the frame.I'm using it with a Fanatec GT DD pro 8nm and the CSL elite V2 pedals. I use it on a couch so I have to use a strut to stop the frame from being pushed forward when I'm using it. With the V2 pedals I'm applying a lot of force.Gotta say it's a very good quality frame, well designed and comes with plenty of bolts. With other stands you would have to go to the hardware store for more bolts. There is absolutely no flex using the 8nm DD pro. This stand is for someone who hasn't the space for a full racing rig. It's the next best thing. If you were using pedals that didn't have a load cell you wouldn't need a strut because it wouldn't move.I think it's the best racing stand on the market. It'd probably handle anything up to 12nm maybe even 15nm

Ho preso questa postazione per il mio simulatore avendo necessità di qualcosa di compatto e trasportabile fra le stanze. Questo prodotto era ciò che cercavo con una qualità ottimale per il mio Fanatec.La caratteristica che mi ha fatto decidere era la possibilità di utilizzarlo con una qualsiasi sedia da ufficio, riducendo così gli ingombri di un sedile appositamente dedicato. Possedendo io una sedia di qualità ho potuto sfruttare questa per la guida.I materiali e gli accessori inclusi sono molto ben studiati, si può regolare su molte posizioni sia la pedaliera che il volante, consentendo spostamenti in avanti-indietro, su e giù ed addirittura inclinazioni differenti. Le piastre sono solide e tutta la struttura non flette durante la guida, considerando forze del motore fino a 8Nm del mio sistema (per forze superiori è comunque consigliato un cockpit più solido).Il suo punto di forza è la possibilità di essere utilizzato sia con una sedia che con un sedile dedicato (acquistando il kit dallo stesso produttore). Per adattarlo alle sedie da scrivania è presente una staffa nella quale inserire le ruote creando così un sistema solidale che non si muove con la guida. Nel mio caso avevo posizionato 4 rotelle anche sotto la postazione per spostarla comodamente.Il tutto è ripiegabile (nei limiti del volante/pedaliera installati) per occupare ancora meno spazio per eventualmente riporlo in qualche angolo.L'unica pecca che vi ho trovato è nel supporto per cambio e freno a mano, il quale non ha regolazioni se non minime e questo mi ha fatto fare il reso di questo prodotto in favore di una postazione autocostruita, perchè entrambi rimanevano troppo attaccati al volante rendendo fastidioso oltre che scomodo l'utilizzo. Rimane invece ottimo per i simulatori con solo volante e pedaliera, in quel caso lo consiglio.

Hab mit zum Einstieg ins Simracing das Moza R5 Bundle gekauft.Die Wheelbase mit Klemme an meinem schweren Schreibtisch zu betreiben war kein Problem. Allerdings müssen ja auch die Pedale einen gewissen Druck aushalten - ohne Befestigung hat mich das Gerutsche einfach genervt und ist praktisch nicht spielbar.So habe ich mir hier den NLR Wheelstand 2.0 gestern bestellt, heute aufgebaut und was soll ich sagen? - Einfach toll!Von der Montage bis hin zum Betrieb bin ich wirklich begeistert. Ja, das Teil ist wirklich schwer, mal eben hin- und herrücken auf dem Teppich ist nicht so einfach. Werde deshalb noch feststellbare Rollen montieren.Auch die Aufnahme für die Rollen des Bürostuhls ist eine prima Sache, so rollt dieser nach nicht hinten beim Bremsen.Was mich besonders überrascht hat: Entgegen aller bisher gesehenen Beiträge passt die Moza R5 Wheelbase auf die Montageplatte mit allen 4 Schrauben! (In der Anleitung sind auch die vorgesehenen Löcher gekennzeichnet).Möglicherweise wurde das System inzwischen angepasst, denn bisher konnte die R5 wohl nur mit 2 Schrauben befestigt werden. Hatte mich deshalb schon darauf eingestellt, die Wheelbase mit der Schreibtischklemme zu befestigen - nicht nötig.Auch die SRP Lite Pedale konnte ich ohne Probleme auf die Pedalplatte schrauben. Vorne Schrauben mit Mutter, hinten die Moza Pedalplatte von unten (mit den Abstandshülsen!) an die NLR Platte verschrauben - passt perfekt.Die Feinjustage wird denn mit den NLR Einstellungsmöglichkeiten vorgenommen.Die Aufnahme für einen Schalthebel nutze ich nicht und kann dazu nichts sagen.Viele Einstellungsmöglichkeiten, sehr stabiler Aufbau, nichts wackelt oder knarrt, allerdings sehr schwer, zusätzlich Rollen zu empfehlen.Von mir klare Kaufempfehlung!

Au top du top si vous manquez de place comme moi et que vous disposez d'une base FANATEC DD PRO en 8Nm avec pédalier CSL (avec kit load cell) (je joue sans levier de vitesses/frein à main). Stabilité exceptionnelle pour ma configuration. Emballage, kit visserie, tout est au top. Prévoir un espace de 75cm de profondeur, 80 de largeur et de 90 cm de hauteur si jamais vous ne souhaitez pas la replier à chaque usage. Le design et les réglages possibles conviennent à mon gabarit (1,85m)

Easy to assemble with either the paper or video instructions.Very sturdy frame. I mounted the Fanatec CSL DD wheel base and pedals, the frame stays solid and doesn't budge. The chair tray is a great feature.Solid investment for your sim racing, as it is extensible with a fixed racing chair if you ever wanted to.Mind that it's heavy by itself, even heavier with wheel base and pedals mounted. You can fold it, but I can recommend getting some M8x15 wheels with brakes to move it around and save your back. The frame already has the holes provided as it comes with some basic feet in the package.

I was looking for something solid to mount a direct drive wheel base to that I could get slide out of the way and fold up when I need to.All parts of the stand are actually pretty thick pieces of steel. This makes the whole setup VERY heavy (wheel stand, wheel base and rim, pedals, shifter, and, button box). This doesn’t take away from my rating - if you want a lighter wheel stand that is easier to move, you buy one that is made with more lightweight material and that will likely flex more. I use mine on carpet and have carpet sliders under the included wide rubber feet and it is easy enough to slide around. The chair cradle works well and keeps my chair and wheel stand together even with the carpet sliders under the stand.Great adjustability! I like to race and truck and I change my setup when I go between them. For trucking, I move the pedal try a little closer, and I tilt the wheel back. When I race I move the pedal tray a little farther away and tilt the wheel down.Compatibility is great. I have a Fanatec wheel base and heusinkveld sprints and everything mounted with no problems. I do not have the heusinkveld pedal base plate - the pedals are mounted directly to the wheel stand 2.0 pedal plate and I have no issues. When braking very hard, this plate DOES flex slightly, however this flex would probably be eliminated by using the heusinkveld pedal base plate mounted to the wheel stand 2.0 pedal plate.There are a couple small things I wish were different - I wish they shipped smooth plastic feet with the stand so you could slide it easier on carpet so that I didn’t have to use other carpet sliders that aren’t secured to the stand, I wish you could tilt the wheel back slightly more, and I’m not the biggest fan of the shifter mount. I’m not sure how they could improve it, but when using it, the shifter isn’t in the most natural feeling position (I have two pieces of 8020 aluminum secured together at a right angle and clamped to the mount and my shifter is mounted to the 8020, placing the shifter in a lower, more natural position - it’s less stiff but in VR you don’t notice and it works great).This design could be improved SLIGHTLY but for the price, this is a no brainer. I had previously been using a wheel mounted to my desk and the difference is night and day. I gave this 5 stars instead of 4 because of the quality, and the issues I had were so minor they either don’t really matter, or you can work around them.Great stand for a good price! Would recommend to anyone looking for a STURDY wheel stand!