4x4TruckLEDs 2015-2016 Ford F-150 LED Ballast Relocation Kit (Anzo Switchback High Beams)

الوصف

This kit should be used in conjunction with our 4x4TruckLEDs XHP Series 6000 Lumens CREE LED Headlight Conversion KitWhen installing the XHP Series 6000 Lumens CREE LED Headlight Conversion Kits, It is recommended that you install the ballast/driver on the outside of the headlight cavity on the 2015+ Ford F-150s. Due to the design of the 2015+ F-150 housing, the led ballast will create additional heat within the headlight cavity and possibly cause the LED diode on the bulb to overheat. This relocation kit fixes this problem.The kit includes the following-1 tube of RTV Silicon-One pair of extension wires (based on the bulb size and housing style)-One pair of rubber boots-Wire connectors-Installation instructionsThese help aid the installation of the Ballast outside the 2015+ Ford F-150 headlight housing.Note: On the 2015+ Anzo Projection Housings there is no boot provided for the low beam side as the boots do not fit over the low beam side. You will need to make a hole in the existing cover. Follow the instructions provided in your kit as normal (substituting the included boot for the factory cover provided with your Anzo Headlights). You'll make a small hole in the Anzo cover to run the wires through (use the included silicone to seal up this hole).(Actual items supplied in kit may vary from photo shown)