Oznium20 pieces of PLCC-2 Surface Mount LEDs, 3528 Size SMD SMT LED - Cool White

Removed original LEDs and soldered these in my Xbox s.Work great.

Works for 2001-2007 Highlander, turned out pretty well and they were easy to work with. Same brightness as stock. Same dimensions as factory SMD

Good delivery time frame very competitive price

This is the neutral white color and it is bright. I had to set the dimmer halfway.I didn't get any dead bulbs and they are all working great.I used a regulated soldering iron set at 800 with a medium tip. Heat one side of old bulb and lift up using the tip of the iron, then use tweezer to hold bulb and heat the other side to remove old bulbTo install, make sure the board doesn't have too much lead. Use tweezer to hold new bulb and heat one side, while lead is heated, push the new bulb in place. Then solder the other side. Then go back to the other side and just pass the tip of the iron in sliding motion just to make sure the lead is connected with the bulb.DO NOT solder for.more than 2 seconds or your bulb will melt. Let it cool for a few seconds and go back to fix it.

I used these for my cars dash to change the color and they work very good! I used the UV and Pink ones for my car, on camera the UV looks blue but in person it's clearly visible, but just so you are aware, the purple ones are quite more dimmer than the pink ones I got, so if you are looking for something brighter the UV's would not be the best choice!Anyway they all worked and came packaged nicely! Would recommend!