MG Chemicals 8341-50ML No-Clean Soldering Flux Paste, 49.0 g Jar, Pack of 1

This product is absolutely amazing not too much comes out when you're using it the size is disturbingly amazing for as little of a bottle as it is it does a lot and goes a long way there is no odor to it it's easy to clean up with a little alcohol is precise and the locations that you put it in and how hard you squeeze it doesn't allow you with the rubber stopper to pour out too much this is just a superb product

I bought 10ML of MG Chemicals - 8341 on 4-2020 and I forgot I had it for over 5 years! Well I popped the top and to my surprise it was absolutely perfect. I quickly noticed it was really thick and moderately difficult to push out of the large nozzle. I was testing my new Sequre ht 140 hot tweezers. With the assistance of this flux it worked like a dream. When heated the thick opaque cream turned sticky and runny. Spanning out away from the heat source. As I heated the pad on the board and feed the Kester to the tip the flux did it's magic and a beautiful mound of solder formed on the board pad. Not much smoke at 350C and no smell was detected. Being 5 plus years in storage it worked perfectly. I felt that satisfaction well up inside me as I moved to the next pad. The only let down was cleaning the flux off of the board. I was as sticky as a glue trap for mice. ISP had to be applied and scrubbed 4 times to remove it. Aside from that, the flux functioned perfectly and was easy to use. 5 star product as I see it.

Best solder for game console/controller work. Solder flows like a dream! Easy to clean when needed. I fill my own blunt tip syringes with this tub. Saves $$$

This stuff is amazing if you get it in the "pneumatic dispenser" I just call it a syringe. The stuff in the tube is not that easy to work with, and not a good refill for the dispenser if you have an empty one; it has some included solids that block up the applicator tube. I like that I can dispense a very small amount, and with the cap it lasts for years. I have bought 3 of these in the last year because I don't do that much soldering, but each time it's because I ran out, not that the flux went bad.

It works really well, but it's far from "no clean". It leaves a sticky residue that can be cleaned up with 99% IPA

Excellent flux. Expensive but well worth it. I've been using this MG flux for around 6 years now and nothing beats it. Delivered quickly and well packaged.

1. The No Clean Flux Paste is an essential tool for professionals engaged in the touch-up and repair of surface mount assemblies. Packaged in a convenient syringe dispenser, it allows for precise application, ensuring efficiency and accuracy in repairs. 2. Formulated with a unique blend of high-grade synthetic resin and thixotropic agents, this flux paste is specifically designed for use with both high-temperature lead-free and conventional Sn/Pb alloys. It delivers optimal fluxing activity, promoting rapid wetting action and extensive wetting spread. 3. As a no clean formulation, the residues left behind do not require removal for most applications, making it an ideal choice for streamlined processes. Its excellent wettability, non-conductive, and non-tacky residues ensure compatibility with both lead-free and leaded solder systems, enhancing overall performance in electronic assembly tasks.

Satisfied....

It's very easy to put together and take apart to store. Great wetting and easy to use, though it takes a bit of pressure, so difficult sometimes with one hand. Does leave surface quite sticky, so I clean it off after to avoid dust build up and getting my fingers tacky. Cleans off well with 99% alcohol

Fa egregiamente il suo lavoro

J'ai récemment acheté la pâte de flux sans nettoyage de MG Chemicals et je dois dire que je suis très satisfait de mon achat. J'utilise ce produit pour le brasage de composants électroniques sur des circuits imprimés, et je dois dire que cela fonctionne à merveille. La seringue de 10 mL est très pratique et permet une application précise de la pâte de flux. J'ai été agréablement surpris par la qualité du produit, qui a permis une soudure facile et sans défauts. De plus, le fait qu'il n'y ait pas besoin de nettoyage après utilisation est un véritable avantage pour gagner du temps et de l'énergie. En comparaison avec d'autres produits similaires sur le marché, je trouve que le rapport qualité-prix de cette pâte de flux est excellent. Elle est un peu plus chère que certaines options bon marché, mais la qualité et la facilité d'utilisation supérieures en valent vraiment la peine. En résumé, je recommande vivement cette pâte de flux sans nettoyage de MG Chemicals à tous ceux qui cherchent un produit fiable et pratique pour le brasage de composants électroniques. La qualité est au rendez-vous, le prix est raisonnable et l'absence de nettoyage après utilisation est un vrai plus. Je suis très satisfait de mon achat et je n'hésiterai pas à réutiliser ce produit à l'avenir.

This is an excellent product, it is easy to use and achieves a good result with good solder flow.

Geiles Zeug. Zwar nicht "tacky" aber tut was es soll.