BTF-LIGHTING RGBW RGB+Cool White SK6812 (Similar WS2812B) 4 Colors in 1 LED Strip Individually Addressable 16.4ft 60Pixel/m 300LED Light Dream Color IP65 DC5V White PCB (No Adapter or Controller)

Easy to install and works great. Adhesion is only fair. I used mounting strips with diffusers for my installation. I used the dig-quad controller with WLED app on phone. Works great with these RGBW strips. I use them for Christmas lights and normal accent lighting the rest of the year. The white (W) led is very bright and uses lots less power than RGB.

Installed outside in some channel hooked up to an ESP32 and WLED works and looks great.Have around 30' of light and had to inject power in middle and at the end for the right balance with no drop in brightness. Love it.

These are incredible LED Strips. Man they use a lot of power but good they are

I bought 4 of these for a home theater build and didn’t get around to installing them until after the return period had passed. I tested them all and they were fine but I did not notice that I received 3x natural white strips (what I ordered) and 1 warm white strip until they were installed. I contacted BTF customer support through their web site and after a bit of back and forth they replaced the strip. I am very happy with both the performance of the strip in my project and the customer support. Will definitely be a return customer even though these are expensive.

I have purchased 3x of these to install in a project. All installed, all worked well for about 2 weeks before they just start flickering non stop. Not a wire connection issue. They weren't moved. Nothing changed. They just randomly will start failing and instead of having cool individually addressable patterns, you'll get a flurry of unorganized color that would trigger an epileptic person.So, after working with the manufacturer and horrible amazon support (remember - they won't do anything for you after 30 days), the manufacturer asked me to submit a video. They started to give me the run around, until they saw clearly that ALL 3 different installations, properly installed, had failed. So they sent me 3x new strands of LEDs.Same thing, installed them properly, all wired up, they looked great for about 2-3 weeks. Now... they failed again. All of them. There is something wrong with the manufacturing process where these will just guaranteed fail on you in about 2-3 weeks of running. I don't know if they output too much heat (I don't even have them at max brightness), I don't know if humidity is a factor, idk. All I know is that spending $50 per strand to have it fail in less than 30 days is unacceptable, except now, the manufacturer and amazon won't give me back my money for these poor quality LEDs.At first I thought, is it maybe the wiring? Nope, unconnected and reconnected to the LED controllers. Switched LED controllers. Switched power sources for the LED controllers. It doesn't matter, these will just fail on you.

I used this RGBW strip in an ESP8266 + WLED project and it works great. There was an issue with the received spool but BTF support responded right away to an email and quickly resolved it. Great product and support. Will be buying more.

This LED strip is exactly what I wanted: Black PCB, no heavy silicone waterproofing, and the new SK6812 RGBW, which ROCK! I mean, the white is not warm nor cold, just right, and with the right controller (I chose the "Addressable LED Bluetooth Controller iOS Android App Wireless Remote Control DC 5V~12V for SK6812 SK6812-RGBW WS2812 SM16703 Dream Color Programmable RGB LED Strip Pixel) https://smile.amazon.com/gp/product/B07G77YD9L/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 and a 5V 10A power supply brick you get >240 moving patterns or solids with a smart phone, in my case iphone 7S. Bright, and as I said, I can't believe how flawlessly it works with my iPhone. immediate response, and the search to find the lights is immediate. I guess I'm reallly speaking of the controller that I mentioned. These LEDs are to spec, and the app allows you to specify how may in the strip. The sticky backing is insufficient as usual, 3M or not. Use it with "Adhesive Cable Tie Mounts Black Zip Tie" micro if possible. EVERY PIXEL IS RGBW, unlike in the WS2812, which are RGB then W then RGB ... and the controller I mentioned has a separate brightness for the white channel. Some of the 240+ patterns apparently use the white channel, a good thing.

I used the RGB+ Cool White SK6812 to display my Immersion TV lighting with HyperHDR. The lights are PERFECT! I am very impressed with the rich color and brightness. The strip and LEDs seem to be very good quality too!! Im ordering more for sure!

I've been quite pleased with the BTF-LIGHTING RGBW SK6812 LED strip's performance. It produces vibrant colors and works well with WLED when paired with an ESP8266 D1 Mini. To enhance its functionality, I incorporated a 100-ohm resistor into the data line, which proved to be an effective measure to eliminate flickering and stabilize the data signal. This straightforward modification ensured a smoother operation of the LED strip.

belles couleurs, fonctionne super bien avec WLED et un ESP32. Pour l'alimentation, ça passe encore avec 2x 5m de guirlande, mais si on met du rouge à fond par exemple, on se rend compte que les teintes sont fausse et qu'il faut alimenter en plusieurs points ; c'est à prendre en compte avec cette densité à 60 led/m si vous voulez faire une déco de 10m de long très lumineuse.

Obwohl der Streifen als Outdoor tauglich angegeben wird ist er mir voll Wasser gelaufen. Leider konnte ich nicht wirklich sehen von wo, ich vermute aber das an dem Anschluss wo es mit Heißkleber verklebt war passiert ist.Blöd das ich es erst nach 2 Wochen bemerkt hatte als der LED Streifen anfing zu flackern und schlussendlich komplett aus ging. Ich schaute mir den Streifen genauer an und die ersten 20-30 LEDs waren komplett im Wasser und korrodiert.Ich hab den Streifen aufgeschnitten sauber gemacht leider keine Besserung. Dann hab ich die ersten 30 LEDs an der Markierung abgeschnitten und die Kabel neu angelötet. Leider auch keine Besserung. Ich hab es auf meine Lötkünste geschoben wieder ein LED weiter abgeschnitten und von der anderen Seite verbunden, aber wieder kein Erfolg. Auf der anderen Seite sind ja zusätzliche Kabel zum verlängern.Ein anderer LED Streifen funktioniert an meinem WLED Controller ohne Probleme.Schade...das Licht war super von den Streifen....Update:Der Hersteller hat mich kontaktiert und mir kostenlosen Ersatz angeboten. Der neue Streifen kam auch sehr schnell wieder an. Der Hinweis das der Streifen an der Stelle mit dem Heißkleber nicht komplett Wasserdicht ist hat mich dazu bewogen Wasserfestes Tape drum zu wickeln. Bisher klappt es ohne Probleme. Warten wir mal die nächsten Regenschauer ab.

I used 2 strips to make a massive animated Christmas comet with tails across our living room windows.Pair this strip with an ESP32, WLED software, a good 5V supply ~2A min and a 220 ohm resistor for the data line. Sorted. WLED software makes this so easy