Six channels for temperature & fan speed control. Usually it controls 6 fans. But you may use 1 to 2 cable (for 2 fans, but only one fan with FG signal) or 1 to 3 cable (for 3 fans, but only one fan with FG signal). So it may also control 12 fans or 18 fans depending on your additional cable type SPECIFICATION Demensions ------ 147*66*42.6 mm Weight -------- 258.8 g Material ------- LCD Screen, Metal, PCB Fan Connector ------ 3 pin/4 pin Included Accessories ------ 4 x M3 Screws Temperature Sensors ------- 6 x Temperature Sensors Brightness Levels ------- On / Off Control Modes ------- Manual / Automatic Fan Channel Quantity ------ 6 Fan Channel Wattage ------- 24 Watts x 6 Temperature Range ------- 0 to 100 degree centigrade Measurement Frequency ------- 2 Seconds Temperature Alarm Range ----- 25 to 90 degree centigrade Minimum Power To Fans ------ 40% Screen Size -------- 5.25 Inches Screen Type -------- Resistive Touch Fan Control Method ------- PWM Operating considerations(After read instructions) 1. Adjust fans speed: Keep press FAN1-FAN6 about 3s untill the speed flashing, than press "+" and "-" to adjust speed. (Use your fingernail to press keys will be better) 2. Power key: Power key is use to turn off the screen light. Keep press about 5s to shut down the screen, controller keep working and dates didn't change. Press any other keys to turn it on again. 3. Temperature: Keep press key "℃/℉" about 3s untill temp flashing, than press "+" and "-" to adjust temp date. (Set the temp to a fixed value, controller will alarm when the temp meet this value, and fan will speed up automaticly untill temp down. Unless the speed has been to fan the highest rated speed, it can not down the temp. Please adjust your temp to a higher value.)
ترست بايلوت
منذ 4 أيام
منذ أسبوع