VIFLYDrone Strobe Light, Anti Collision Light for FAA Drone Night Flying, Fits DJI Mini 3 Pro/Mini 4 Pro/Mini 2/Mini SE/Air 3/Air 2S/Mavic 3/Mavic 2 (3pcs Pack)

Ten minutes after testing this strobe I still can't see properly. This is absolutely more than I expected, I can't believe this little gadget can do more than it's capacity. I need more star to add to the five I've already given.

So bright for something so small. Bought three for a Mavic air 2 and very happy. Just clean your plastic properly for the velcro patches to stick on. I was alittle worried about how well the light stuck to the velcro, so I twist and wriggle the lights to the mounting velcro patches, so far they haven't fallen off. Night flights are so easy to see them working. Look like a UFO or hovering helicopter. Different colours are easy to choose but be gentle with the button as it's small. You will be genuinely surprised by the size and light output but in a good way 👍🏽 hope this helps

These are bright and very light with nice Velcro mounts supplied for your drone. Best charged with their own supplied cable.

Pretty great. The first night I got them, the haters in my neighborhood all came out and two days later, they sent a threatening letter through the HOA. That only made me increase my number of flights especially at night.The lights are very light and solidly clear wrapped.

Drone Anticollision lighting for DJI Phantom3 and Mavic Mini2PROSThe price for three strobe units is reasonable for the quality of the strobes.The battery can be charged using USB portable emergency battery packs. Good for charging between missions.The brightness will meet most twilight needs ( But may not meet FAA requirements please see CONS below)Lights are easily activated by a few presses of the button on each unit.Battery life testing was a little more than an hour when set to White Flashing mode.Battery life set to Red or Green to Solid One Mode was about 1-1/2 hours (Solid white was not tested).I believe setting the Red & Green side lights to Fast-Flashing mode is legal and aids to the drone's visibility. (Increases the drone lighting signature but may reduce battery life)CONS:The supplied hook and Loop tape does not feel secure for long periods of use. I replaced the supplied tape with a better 3M brand of hook and loop (aka Velcro). Between and after flights remember to check strobe light mounting and replace the hook & loop tape if not secure!The Red (Right side) and Green (Left Side) lights (Not flashing) are bright enough for most local applications but may not be visible beyond 1 mile. Be aware the sidelights should be on solid for manned aircraft and used to determine aircraft orientation.The White strobe (Slow Flashing) will be bright enough for most flights but may not be enough to exceed the 3-Mile FAA requirement.SOME NOTES:As a reminder, the white strobe is mounted as high as possible on the airframe.Also, remember the white strobe (The Anit-Collision Strobe light) helps manned aircraft see the drone and not for the observers and pilot to track the drone.Performing a good Pre-Flight & Post-Flight as well as the often-overlooked Thru-Flight inspection between flights is a pilot's duty and required by the FAA!

These lights are very bright first off, second how in the world do you secure them to the drone? The velcro does not work well at all. I did fly with them and they stayed on however, when I put the drone in my backpack, the light comes off and I have to reapply it to the velcro. I have tried other ideas and nothing seems to keep them attached to the drone. Also, one of the lights did not work at all. I ended up sending these back for the reasons listed above. They need to figure out a way to secure these better and these lights would almost be perfect.