3.7V Lipo Battery 600mAh Rechargeable Lithium ion Polymer Battery 602535 Lithium Polymer ion Battery with SH 1.0-3P Connector

My son's high-end Logitech headset would no longer take a charge to any kind of capacity, and was only lasting an hour or less after a charge. I was able to open it up and take some measurements and this battery fit the bill perfectly. I went from 210 milliamp to 600. This makes the headset last massively longer on a charge, and it barely added any weight whatsoever. I did have to swap the end connectors, but simply was able to release the pins in this one and slide into the Logitech one. Great value works perfectly.

Does not work for a 5S. Don't waste your money or your time.

I bought this to replace the dead battery on my Transcend Drivepro DP-100. It was a perfect replacement for the OEM battery that came with the dashcam and connected easily. Dismantling of the dashcam was not difficult but there were seven or eight EXTREMELY tiny screws involved, so you'll need a jeweler's screwdriver set. After re-assembly and applying power, the Drivepro works perfectly and the new battery now allows my dashcam's memory to retain the date/time for recordings, which is essential if you ever need a video clip to support your case after a traffic collision.

Good functional battery that does its job. Only issue was that the black and red pins needed to be swapped. Almost all of my electronics that could use this battery had the red and black wires flipped. It was an easy fix carefully switching the two pins using some tweezers.

Had to splice and match wiring

I installed this battery in a media player. It replaced a battery of the same voltage but the old one had a lower capacity.The battery works, but the charge-status percentage is always off. It shows unexpected numbers both while charging. There was a time when it failed to charge at all. I think the unit needs to be completely off while charging. I'm not sure what caused that failed charge.It generally works, even with the wrong displayed percentage. But I need to work out why it failed to charge that one time.

My ROAV C1s camera bloated up due to heat and age. Before throwing away the camera thought about looking on Amazon for a battery replacement and found this. I'm glad I did. It has been working flawlessly for two months.

Works great on my Skybell Slim 2. You'll need to splice the wires from the old original battery or disconnect the end piece connection to refuse for the mother board. Works great and fits!