Dash Cam Hardwire Kit, Miofive 11.5ft Micro USB Hard Wire Kit for Dashcam with Fuse Kit, Enables Parking Mode, Low Voltage Protection for Dash Cameras

MIOFIVE was very helpful when I had my little mishap and blew a fuse. The replaced the entire unit with a couple of days. Thank you, MIOFIVE!

This was exactly what I needed to get my dashcam hard wired into my fuse box. It came with multiple styles of fuse taps, so it can fit a variety of vehicles without it requiring an extra trip to the hardware. INstructions are easy to follow. All you need is a test light. Would recommend.

This wiring kit works perfectly with my dash cam. Once I got it wired to the correct fuses in my fuse box, the ACC & ACC+ power works perfectly. The ACC keeps my dash cam running in low power for parking mode and when I start my truck, the ACC+ triggers the camera to start running in full loop recording mode. I recommend this item!

When buying a hardwire kit make sure that it has 3 wires (This one DOES) when using for a dash cam with parking mode. It took a long time to find and connect the red wire to an always hot fuse, the yellow one (acc) was a cinch, but I could not make the red one work. I changed the cable, and it finally worked. So, my belief was that it was a defective wire. Nope. I ran a test with an ohm meter, and it was good. Using a loupe, I saw that the fuse was the culprit. Grrr, all this work and I received a blown fuse, not by me though. Also, I wish that the power box had a switch for selecting desired voltage. In any case, I'll update this post should problems arise.

2nd order to get the proper kit. This one was the right one.

I thought it was a gos. Not a dash cam. Not easy to install. Not user friendly. Deters cops and other drivers from misbehaving though

The 90 deg bend in the micro usb connector faces the wrong way and will not seat properly into camera due to proximity to the camera’s mounting bracket. It might be a good harness, just not for the Redtiger F7N.

I works great as expected for MIOFive cam.

Bought to hardwire in my dash cam. I have done some stereo work in the past and fairly competent around a car and this was a fairly straightforward installation. Instructions were pretty good and kit comes with a selection of fuse ends for a variety of fuse types. Fitted into a small car but there was plenty of extra cable for the rear camera if needed i.e. for an estate or 4x4. Changed the position of the rear camera a few times until we were happy and all the wires are tucked away neatly. Very pleased with the result.

So far, so good. It perfectly matched my 70Mai dash cam and my car’s fuse box and has been working fine for almost two months. Installation can be a bit tricky since no tools are included, but it wasn’t a big deal—at least for me. How long will it keep working like this? Who knows.

works properlyand it is good product

best product.works fine highly recommend.

Very good product and easy to install